I have some missing symbols in my kernel:

midi.o(.text+0x4bd): undefined reference to `midi_cd'
uscanner.o(.text+0x22f): undefined reference to `uscanner_cd'

What did I miss to include? Why isn't that included automatically? ;)  
I cam get rid of the uscanner problem if I  don't compile it in, but that
can't be the solution. This is on i386 with -current as of today. 
Kernel config file is attached below.  Please include me in CC: as I am
not on this list. Thanks!


 - Hubert


#	$NetBSD: GENERIC,v 1.400 2001/02/04 17:36:03 perry Exp $
#
#	NOON -- Toshiba Satellite 35D
#	 * Add PCIBIOS and PCIBIOS*FIXUP to get cardbus bridge going
#	 * Audio driver can be fount at:
#	   ftp://trap.fukui-med.ac.jp/pub/tera_utils/NetBSD/sys/dev/pci/
#	   or in post-1.5 NetBSD as of Feb 2001
#

include "arch/i386/conf/std.i386"

#ident 		"GENERIC-$Revision: 1.1.1.1 $"

options		MSGBUFSIZE=16384

maxusers	32		# estimated number of users

# CPU support.  At least one is REQUIRED.
options 	I586_CPU
options 	I686_CPU

# CPU-related options.
options 	VM86		# virtual 8086 emulation
options 	USER_LDT	# user-settable LDT; used by WINE
# eliminate delay no-ops in I/O; recommended on all but very old machines
#options 	DUMMY_NOPS

# delay between "rebooting ..." message and hardware reset, in milliseconds
#options 	CPURESET_DELAY=2000

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options 	"CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
#	you don't want the option below ON iff you are using the
#	serial console option of the new boot strap code.
#options 	CONS_OVERRIDE	# Always use above! independent of boot info

# The following options override the memory sizes passed in from the boot
# block.  Use them *only* if the boot block is unable to determine the correct
# values.  Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options 	REALBASEMEM=639		# size of base memory (in KB)
#options 	REALEXTMEM=15360	# size of extended memory (in KB)

# Standard system options

options 	UCONSOLE	# users can use TIOCCONS (for xconsole)
options 	INSECURE	# disable kernel security levels

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=1024	# 1024 pages is the default

options 	LKM		# loadable kernel modules

# Diagnostic/debugging support options
options 	DIAGNOSTIC	# cheap kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
options 	DDB		# in-kernel debugger
options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
#options 	KGDB		# remote debugger
#options 	"KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
#makeoptions	DEBUG="-g"	# compile full symbol table

# Compatibility options
options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
options 	COMPAT_09	# NetBSD 0.9,
options 	COMPAT_10	# NetBSD 1.0,
options 	COMPAT_11	# NetBSD 1.1,
options 	COMPAT_12	# NetBSD 1.2,
options 	COMPAT_13	# NetBSD 1.3,
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_15	# NetBSD 1.5,
options 	COMPAT_43	# and 4.3BSD
options 	COMPAT_386BSD_MBRPART # recognize old partition ID

options 	COMPAT_SVR4	# binary compatibility with SVR4
options 	COMPAT_IBCS2	# binary compatibility with SCO and ISC
options 	COMPAT_LINUX	# binary compatibility with Linux
options 	COMPAT_FREEBSD	# binary compatibility with FreeBSD
#options 	COMPAT_PECOFF	# kernel support to run Win32 apps

# File systems
file-system 	FFS		# UFS
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	NTFS		# Windows/NT file system (experimental)
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay file system
file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union file system

# File system options
options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independent support
options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER	# Network File System server
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Networking options
options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
options 	IPSEC		# IP security
options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	NSIP		# XNS tunneling over IP
#options 	EON		# OSI tunneling over IP

# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
#options 	TCP_COMPAT_42

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options 	MIIVERBOSE	# verbose PHY autoconfig messages
options 	PCIVERBOSE	# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
#options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
options 	SCSIVERBOSE	# human readable SCSI error messages
options 	USBVERBOSE	# verbose USB device autoconfig messages
#options 	PNPBIOSVERBOSE	# verbose PnP BIOS messages
#options	PNPBIOSDEBUG	# more fulsome Pnp BIOS debugging messages
options 	I2OVERBOSE	# verbose I2O driver messages


#
# wscons options
#
# builtin terminal emulations
#options 	WSEMUL_SUN		# sun terminal emulation
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options 	VGA_CONSOLE_SCREENTYPE="\"80x24\""

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?
#config		netbsd	root on sd0a type ffs
#config		netbsd	root on ? type nfs

#
# Device configuration
#

mainbus0 at root

apm0	at mainbus0			# Advanced power management

# Tuning for power management, see apm(4) for more details.
#options 	APM_NO_IDLE		# Don't call BIOS CPU idle function
#options 	APM_V10_ONLY		# Use only the APM 1.0 calls
#options 	APM_NO_POWEROFF		# Don't power off on halt(8)
#options 	APM_POWER_PRINT		# Print stats on the console
#options 	APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts


# Basic Bus Support

# Plug-and-Play BIOS and attached devices

#pnpbios*	at mainbus?

# mainboard audio chips
#ess*		at pnpbios? index ?	# ESS AudioDrive
#sb*		at pnpbios? index ?	# NeoMagic 256AV in sb mode
#wss*		at pnpbios? index ?	# NeoMagic 256AV in wss mode
#ym*		at pnpbios? index ?	# OPL3-SA3

# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0.  A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com*		at pnpbios? index ?	# serial ports

# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt*		at pnpbios? index ?	# parallel ports

#pckbc*		at pnpbios? index ?	# PC keyboard/mouse controller
#fdc*		at pnpbios? index ?	# floppy controller

# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide*	at pnpbios? index ?

# PCI bus support
pci*	at mainbus? bus ?
pci*	at pchb? bus ?
pci*	at ppb? bus ?

# Configure PCI using BIOS information
options 	PCIBIOS			# PCI BIOS support
options 	PCIBIOSVERBOSE		# PCI BIOS verbose info
options 	PCIBIOS_ADDR_FIXUP	# fixup PCI I/O addresses
options 	PCIBIOS_BUS_FIXUP	# fixup PCI bus numbering
options 	PCIBIOS_INTR_FIXUP	# fixup PCI interrupt routing
#options 	PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
options 	PCIBIOS_INTR_GUESS	# see pcibios(4)
#options 	PCIINTR_DEBUG		# super-verbose PCI interrupt fixup

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc*	at pci? dev ? function ?	# PCI "universal" comm. cards

# EISA bus support

# ISA bus support
isa*	at mainbus?
isa*	at pcib?

# PCMCIA bus support
pcmcia*	at pcic? controller ? socket ?
pcmcia*	at tcic? controller ? socket ?

# ISA PCMCIA controllers
pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1	at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
tcic0	at isa? port 0x240 iomem 0xd0000 iosiz 0x10000

# PCI PCMCIA controllers
pcic0	at pci? dev? function ?

# ISA Plug-and-Play bus support
isapnp0	at isa?

# ISA Plug-and-Play PCMCIA controllers
pcic*	at isapnp?

# CardBus bridge support
cbb*		at pci? dev ? function ?
cardslot*	at cbb?	

# CardBus bus support
cardbus*	at cardslot?
pcmcia* 	at cardslot?

# Coprocessor Support

# Math Coprocessor support
npx0	at isa? port 0xf0 irq 13	# x86 math coprocessor


# Console Devices

# ISA console
#pc0	at isa? port 0x60 irq 1		# pccons generic PC console driver
# Keyboard layout configuration for pccons
#options 	FRENCH_KBD
#options 	FINNISH_KBD
#options 	GERMAN_KBD
#options 	NORWEGIAN_KBD
# pccons-specific options:
#options 	XSERVER_DDB	# PF12 gets you into DDB when X is running
#options 	XSERVER		# X server support


# wscons
pckbc0		at isa?			# pc keyboard controller
pckbd*		at pckbc?		# PC keyboard
# "opms" should not be enabled together with "pms" or "pmsi"
pms*		at pckbc?		# PS/2 mouse for wsmouse
pmsi*		at pckbc?		# PS/2 "Intelli"mouse for wsmouse
#opms*		at pckbc?		# backwards compatible PS/2 mouse
vga0		at isa?
vga*		at pci? dev ? function ?
pcdisplay0	at isa?			# CGA, MDA, EGA, HGA
wsdisplay*	at vga? console ?
wsdisplay*	at pcdisplay? console ?
wskbd* 		at pckbd? console ?
wsmouse*	at pms? mux 0
wsmouse*	at pmsi? mux 0

pcppi0		at isa?
sysbeep0	at pcppi?

# Serial Devices

# PCI serial interfaces

# ISA Plug-and-Play serial interfaces
com*	at isapnp?			# Modems and serial boards

# PCMCIA serial interfaces
com*	at pcmcia? function ?		# Modems and serial cards

pcmcom*	at pcmcia? function ?		# PCMCIA multi-port serial cards
com*	at pcmcom? slave ?		# ...and the slave devices

# CardBus serial interfaces
com*	at cardbus? dev ? function ?	# Modems and serial cards

# ISA serial interfaces
#options 	COM_HAYESP		# adds Hayes ESP serial board support
com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
com1	at isa? port 0x2f8 irq 3
com2	at isa? port 0x3e8 irq 5
#com3	at isa? port 0x2e8 irq 9
#ast0	at isa? port 0x1a0 irq 5	# AST 4-port serial cards
#com*	at ast? slave ?
#boca0	at isa? port 0x100 irq 5	# BOCA 8-port serial cards
#boca0	at isa? port 0x100 irq 5	# BOCA 16-port serial cards (BB2016)
#boca1	at isa? port 0x140 irq 5	# this line is also needed for BB2016
#com*	at boca? slave ?
#tcom0	at isa? port 0x100 irq 7	# TC-800 8-port serial cards
#com*	at tcom? slave ?
#rtfps0	at isa? port 0x1230 irq 10	# RT 4-port serial cards
#com*	at rtfps? slave ?
#cy0	at isa? iomem 0xd4000 irq 12	# Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5	# Addonics FlexPort 8S
#com*	at addcom? slave ?
#moxa0	at isa?	port 0x100 irq 5	# MOXA C168H serial card (experimental)
#com*	at moxa? slave ?


# Parallel Printer Interfaces

# PCI parallel printer interfaces

# ISA parallel printer interfaces
lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports
lpt1	at isa? port 0x278
lpt2	at isa? port 0x3bc

# Hardware monitors 

# LM7[89] and compatible hardware monitors
lm0	at isa?	port 0x290		# other common ports: 0x280, 0x310

# VIA VT82C686A hardware monitor
viapm*	at pci? dev ? function ?
viaenv* at viapm?


# I2O devices


# SCSI Controllers and Devices

# PCI SCSI controllers
#ncr*	at pci? dev ? function ?	# NCR 53c8xx SCSI (old driver)

# EISA SCSI controllers

# PCMCIA SCSI controllers
aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI
esp*	at pcmcia? function ?		# Qlogic ESP406/FAS408 SCSI

# ISA Plug-and-Play SCSI controllers
aha*	at isapnp? 			# Adaptec AHA-154[02
aic*	at isapnp?			# Adaptec AHA-1520B

# ISA SCSI controllers
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0	at isa? port 0x170 irq ? drq ?	# DPT SmartCache/SmartRAID
#nca0	at isa? port 0x360 irq 15	# Port-mapped NCR 53C80 controller
#nca1	at isa? iomem 0xd8000 irq 5	# Memory-mapped controller (T128, etc.)

# CardBus SCSI cards
#ahc*	at cardbus? dev ? function ?	# Adaptec ADP-1480

# SCSI bus support
#scsibus* at nca?
#scsibus* at ncr?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
ch*	at scsibus? target ? lun ?	# SCSI autochangers
ses*	at scsibus? target ? lun ?	# SCSI Enclosure Services devices
ss*	at scsibus? target ? lun ?	# SCSI scanners
uk*	at scsibus? target ? lun ?	# SCSI unknown


# RAID controllers and devices


# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000

# ISA Plug-and-Play IDE controllers
wdc*	at isapnp? 

# PCMCIA IDE controllers
wdc*	at pcmcia? function ?

# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
wdc0	at isa? port 0x1f0 irq 14 flags 0x00
wdc1	at isa? port 0x170 irq 15 flags 0x00

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*	at wdc? channel ? drive ? flags 0x0000
wd*	at pciide? channel ? drive ? flags 0x0000

# ATAPI bus support
atapibus* at wdc? channel ?
atapibus* at pciide? channel ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown


# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
#fdc1	at isa? port 0x370 irq ? drq ?
fd*	at fdc? drive ?			# the drives themselves
# some machines need you to do this instead of fd*
#fd0	at fdc0 drive 0

# ISA CD-ROM devices
#mcd0	at isa? port 0x300 irq 10	# Mitsumi CD-ROM drives

# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0	at isa? port 0x308 irq 5 drq 1	# Archive and Wangtek QIC tape drives


# Network Interfaces

# PCI network interfaces
tlp*	at pci? dev ? function ?	# DECchip 21x4x (and clones) Ethernet
#options 	TLP_MATCH_21040
#options 	TLP_MATCH_21041
#options 	TLP_MATCH_21140
#options 	TLP_MATCH_21142

# EISA network interfaces

# ISA Plug-and-Play network interfaces

# PCMCIA network interfaces
an*	at pcmcia? function ?		# Aironet PC4500/PC4800 (802.11)
awi*	at pcmcia? function ?		# BayStack 650/660 (802.11FH/DS)
cnw*	at pcmcia? function ?		# Xircom/Netwave AirSurfer
ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
mbe*	at pcmcia? function ?		# MB8696x based Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
ray*	at pcmcia? function ?		# Raytheon Raylink (802.11)
sm*	at pcmcia? function ?		# Megahertz Ethernet
wi*	at pcmcia? function ?		# Lucent WaveLan IEEE (802.11)
xi*	at pcmcia? function ?		# Xircom CreditCard Ethernet

mhzc*	at pcmcia? function ?		# Megahertz Ethernet/Modem combo cards
com*	at mhzc?
sm*	at mhzc?

# ISA network interfaces
#depca0	at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5	# DEPCA
#le*	at depca?
#ntwoc0	at isa? port 0x300 irq 5 iomem 0xc8000 flags 1	# Riscom/N2 sync serial

# CardBus network cards
#ex*	at cardbus? dev ? function ?	# 3Com 3C575TX
#fxp*	at cardbus? dev ? function ?	# Intel i8255x
#rtk*	at cardbus? dev ? function ?	# Realtek 8129/8139
#tlp*	at cardbus? dev ? function ?	# DECchip 21143

# MII/PHY support
dmphy*	at mii? phy ?			# Davicom DM9101 PHYs
exphy*	at mii? phy ?			# 3Com internal PHYs
icsphy*	at mii? phy ?			# Integrated Circuit Systems ICS1890
inphy*	at mii? phy ?			# Intel 82555 PHYs
iophy*	at mii? phy ?			# Intel 82553 PHYs
lxtphy*	at mii? phy ?			# Level One LXT-970 PHYs
nsphy*	at mii? phy ?			# NS83840 PHYs
nsphyter* at mii? phy ?			# NS83843 PHYs
qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
tlphy*	at mii? phy ?			# ThunderLAN PHYs
tqphy*	at mii? phy ?			# TDK Semiconductor PHYs
ukphy*	at mii? phy ?			# generic unknown PHYs


# USB Controller and Devices

# PCI USB controllers
uhci*	at pci?	dev ? function ?	# Universal Host Controller (Intel)

# CardBus USB controllers
#ohci*	at cardbus? dev ? function ?	# Open Host Controller

# USB bus support
usb*	at uhci?

# USB Hubs
uhub*	at usb?
uhub*	at uhub? port ? configuration ? interface ?

# USB Mice
ums*	at uhub? port ? configuration ? interface ?
wsmouse*	at ums? mux 0

# USB Keyboards
ukbd*	at uhub? port ? configuration ? interface ?
wskbd*	at ukbd? console ? mux 1

# USB Generic HID devices
uhid*	at uhub? port ? configuration ? interface ?

# USB Printer
ulpt*	at uhub? port ? configuration ? interface ?

# USB Modem
umodem*	at uhub? port ? configuration ?
ucom*	at umodem?

# USB Mass Storage
umass*	at uhub? port ? configuration ? interface ?
atapibus* at umass? channel ?
scsibus* at umass? channel ?

# USB audio
uaudio*	at uhub? port ? configuration ?

# USB MIDI
umidi* at uhub? port ? configuration ?

# USB Ethernet adapters
aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters

# Prolofic PL2301/PL2302 host-to-host adapter
upl*	at uhub? port ?

# Serial adapters
# FTDI FT8U100AX serial adapter
uftdi*	at uhub? port ?
ucom*	at uftdi? portno ?

uplcom*	at uhub? port ?		# I/O DATA USB-RSAQ2 serial adapter
ucom*	at uplcom? portno ? 

# Diamond Multimedia Rio 500
urio*	at uhub? port ?

# USB Handspring Visor
uvisor*	at uhub? port ?
ucom*	at uvisor?

# USB scanners
uscanner* at uhub? port ?

# USB scanners that use SCSI emulation, e.g., HP5300
usscanner* at uhub? port ?
scsibus* at usscanner? channel ?

# Y@P firmware loader
uyap* at uhub? port ?

# USB Generic driver
ugen*	at uhub? port ?


# Audio Devices

# PCI audio devices
clct*	at pci? dev ? function ?	# Cirrus Logic CS4281

# ISA Plug-and-Play audio devices

# ISA audio devices
# the "aria" probe might give false hits
#aria0	at isa? port 0x290 irq 10 		# Aria
#ess0	at isa? port 0x220 irq 5 drq 1 drq2 5	# ESS 18XX

#cms0	at isa? port 0x220			# Creative Music System

# OPL[23] FM synthesizers
#opl0	at isa? port 0x388	# use only if not attached to sound card

# Audio support
#audio*	at aria?
audio*	at clct?
audio*	at uaudio?

# MPU 401 UARTs
#mpu*	at isa? port 0x330 irq 9        # MPU401 or compatible card

# MIDI support
#midi*	at clct?		# Cirrus Logic CS4281 MIDI port
#midi*	at cms?			# Creative Music System
midi*   at umidi?               # USB MIDI

# The spkr driver provides a simple tone interface to the built in speaker.
spkr0	at pcppi?		# PC speaker


# TV cards

# Brooktree 848/849/878/879 based TV cards


# Mice

# ISA busmice
# backwards compatible versions
#olms0	at isa? port 0x23c irq 5	# Logitech bus mouse
#olms1	at isa? port 0x238 irq 5
#omms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
#omms1	at isa? port 0x238 irq 5
#opms0	at pc? irq 12		# PS/2 auxiliary port mouse


# Joysticks

#joy*		at pnpbios? index ?	# Game port

# ISA Plug-and-Play joysticks

# PCI joysticks

# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0	at isa? port 0x201


# Miscellaneous Devices

# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1


# Pull in optional local configuration
include	"arch/i386/conf/GENERIC.local"


# Pseudo-Devices

# disk/mass storage pseudo-devices
#pseudo-device	raid		4	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
pseudo-device	vnd		4	# disk-like interface to files

# network pseudo-devices
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	loop			# network loopback
pseudo-device	ppp		2	# Point-to-Point Protocol
pseudo-device	sl		2	# Serial Line IP
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
# rnd works; RND_COM does not on port i386 yet.
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well (BROKEN)

# a pseudo device needed for Coda	# also needs CODA (above)

# mouse & keyboard multiplexor pseudo-devices
pseudo-device	wsmux		2





# HF: FireWire
fwohci* at pci? dev ? function ?
fw* at fwohci?
#fwbus* at fw?
#fwnode* at fwbus? nodeid ?
#scsibus* at fwnode?

-- 
Hubert Feyrer <hubert.feyrer@informatik.fh-regensburg.de>