General notes/questions first:
    this is a Rev.1 Beige G3/DT/233
    ofb0 is an ATI XClaimVR 64 which is the system console
    ofb1 is an ATI Rage II+ (the onboard V.C.), which is not connected
    
    Odd: The NetBSD console looks like it is stuck at 640x480 even though
I'm running at 1024x768. It's almost like I'm working with an X-less xterm
with no window manager :-) Is there anyway to change this back to the 1.4.x
behavior of using the entire screen, or is this the way it's supposed to be
unless set/compiled(!) to use 132xXX mode?

    PLEASE fix the keyboard mapping wherever the problem is. Hitting the
delete key (the one that should be labeled backspace) yields a ^? and I have
to hit Control-H to backspace. The small square "actual" delete key doesn't
seem to do anything, though since the arrow key mappings don't work either,
it's hard to tell.

    The wdcX and wdX/cd0 lines in the dmesg mention that the controller
supports DMA data transfer and the drives support DMA transfer, but no where
does it say if it's actually using it. Can we add a line to the attachment
routines saying what mode(s) we are using (similar to i386)?

    Halting from a shell in the install drops me back into OFW correctly,
but attempting to boot MacOS freezes the computer FWIW. Yes I know I should
just restart, but anyway :)

    The spew at the end from my ZIP drive was from the command "dmesg >
dmesg.txt" on an MS-DOS formatted ZIP disk, dunno what it means.


    Chris


NetBSD 1.5_BETA2 (INSTALL) #3: Mon Nov  6 20:59:28 PST 2000
matt@duel.local:/other/macppc/kobj/INSTALL

CPU: 750 (Revision 201)
total memory = 192 MB
avail memory = 170 MB
using 2483 buffers containing 9932 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 512KB backside cache
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0002 (rev. 0x40)
ofb0 at pci0 dev 13 function 0: vendor 0x1002 product 0x4749
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation)
ohci0 at pci0 dev 15 function 0: vendor 0x1045 product 0xc861 (rev.
0x10)ohci0: interrupting at irq 25
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1045 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:6e:31:29
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
davbus at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
wd0 at wdc0 channel 0 drive 0: <WDC AC26400B>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6149 MB, 13328 cyl, 15 head, 63 sec, 512 bytes/sect x 12594960 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at obio0 offset 0x21000 irq 14: DMA transfer
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <MATSHITA CR-585, , ZS20> type 5 cdrom removable
cd0: drive supports PIO mode 3, DMA mode 1
adb0 at obio0 offset 0x16000 irq 18: 2 targets
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0: console keyboard, using wsdisplay0
adb0 addr 3: relative positioning device (1) not configured
ofb1 at pci0 dev 18 function 0: vendor 0x1002 product 0x4754
ofb1: 1024 x 768, 8bpp
wsdisplay at ofb1 not configured
scsibus0: waiting 2 seconds for devices to settle...
cd1 at scsibus0 target 2 lun 0: <JVC, XR-W2010, 1.51> SCSI2 4/worm removable
sd0 at scsibus0 target 5 lun 0: <IOMEGA, ZIP 100, D.09> SCSI2 0/direct
removable
sd0: drive offline
md0: internal 1920K image area
Microsoft Microsoft IntelliMouse\M-. Optical, class 0/0, rev 1.10/1.08, addr
2, 
uhub0 port 2 not configured
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
----------------------------------------------------------------------------
sd0(mesh0:5:0): illegal request, data = 00 00 00 00 21 00 00 00 00 00 00 01
01 04 9e 00 00
sd0(mesh0:5:0): illegal request, data = 00 00 00 00 21 00 00 00 00 00 00 01
01 00 fe 00 00
sd0(mesh0:5:0): illegal request, data = 00 00 00 00 21 00 00 00 00 00 ff fe
01 04 40 00 00
sd0(mesh0:5:0): illegal request, data = 00 00 00 00 21 00 00 00 00 00 00 01
01 04 4e 00 00
sd0(mesh0:5:0): illegal request, data = 00 00 00 00 21 00 00 00 00 00 00 01
01 03 8a 00 00
-- 

Murphy was an optimist.