Subject: Xircom NIC problem in 1.5 ALPHA
To: None <>
From: Oleg Polyanski <>
List: current-users
Date: 07/14/2000 14:05:03


        I've got problem with Xircom CreditCard Ethernet adapter (model IIps)
        in 1.5 ALPHA/i386. After configuring interface `xi0' I got

xi0: device timeout
xi0: interrupt from dead card

        I've tried to  assign  different  IRQ  numbers but  without  success.
        Browsing `if_xi.c'  didn't help too.    Any hints and  ideas  greatly
        appreciated. `dmesg' output attached below.

P.S.  Forgot  to add - I've   plugged another Xircom  NIC  (model 10/100) but
kernel just hangs in `ifconfig' so I guess there are some driver issues.

Content-Type: application/octet-stream
Content-Disposition: attachment; filename=dmesg.output

NetBSD 1.5_ALPHA (HACKER-REALM) #1: Fri Jul 14 05:46:48 PDT 2000
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
total memory = 48960 KB
avail memory = 42556 KB
using 637 buffers containing 2548 KB of memory
mainbus0 (root)
pnpbios0 at mainbus0: code f0000, data 0, entry d19, control 1 eventp 510
pnpbios0: nodes 19, max len 190
pnpbios0: not docked
pnpbios0: node index mismatch (static): requested 0, got 1
PNP0C01 (mem 0-9ffff f0000-fffff 100000-302ffff fff00000-ffffffff) at pnpbios0 index 0 ignored
PNP0200 (io 0-f 81-83 87 89-8b 8f c0-df, dma 4) at pnpbios0 index 2 ignored
PNP0000 (io 20-21 a0-a1, irq 2) at pnpbios0 index 3 ignored
PNP0100 (io 40-43, irq 0) at pnpbios0 index 4 ignored
PNP0800 (io 61) at pnpbios0 index 5 ignored
PNP0C04 (io f0-ff, irq 13) at pnpbios0 index 6 ignored
pckbc1 at pnpbios0 index 7 (PNP0303): kbd port
pckbc2 at pnpbios0 index 8 (TOS7400, attached as PNP0F13): aux port
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
PNP0B00 (io 70-71, irq 8) at pnpbios0 index 9 ignored
PNP0C02 (io 80 84-86 88 8c-8e e0-ef 24-25 b0-b2 480-48f 786 1880-188f) at pnpbios0 index 10 ignored
fdc1 at pnpbios0 index 11 (PNP0700)
fdc1: io 3f2-3f5 3f7, irq 6, dma 2
fd0 at fdc1 drive 0: density unknown
PNP0600 (io 1f0-1f7 3f6, irq 14) at pnpbios0 index 12 ignored
PNP0600 (io 170-177 376-377, irq 15) at pnpbios0 index 13 ignored
com2 at pnpbios0 index 14 (PNP0501)
com2: io 3f8-3ff, irq 4
com2: ns16550a, working fifo
com3 at pnpbios0 index 15 (PNP0510)
com3: io 2f8-2ff, irq 3
com3: ns16550a, working fifo
PNP0401 (io 378-37a 778-77a, irq 7, dma 3) at pnpbios0 index 16 ignored
PNP0931 (mem a0000-bffff e4000-effff, io 3b4-3b5 3ba 3bf 3c0-3cf 3d0-3d7 3da-3dc) at pnpbios0 index 17 ignored
PNP0E00 (io 3e0-3e1) at pnpbios0 index 18 ignored
ESS6881 at pnpbios0 index 19 disabled
isa0 at mainbus0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1301MAV>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 1296 MB, 2633 cyl, 16 head, 63 sec, 512 bytes/sect x 2654280 sectors
wd0: drive supports PIO mode 4, DMA mode 2
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-1502B, 4800342206, 2996> type 5 cdrom removable
cd0: drive supports PIO mode 3, DMA mode 1
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask ef65 netmask ef65 ttymask ffe7
pcic0: controller 0 detecting irqs with mask 0xdeb8:..5..9..10..11
pcic0: using irq 5 for socket events
IPsec: Initialized Security Association Processing.
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: Xircom, CreditCard 10Base-T, PS-CE2-10, 2.02
pcmcia0: Manufacturer code 0x105, product 0x10a
pcmcia0: function 0: network adapter, ccr addr 800 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask fffc; iomask a, iospace 300-30f; memspace 0-fff; mwait_required rdybsy_active io8 io16 irqpulse irqlevel powerdown
xi0 at pcmcia0 function 0 port 0x400-0x40f: Xircom CreditCard 10/100 Ethernet
xi0: Ethernet address 00:80:c7:57:23:81
pcmcia0: card irq 9
boot device: wd0
root on wd0a dumps on wd0b
xi0: interrupt for dead card
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
xi0: device timeout
xi0: interrupt for dead card