Subject: Re: AHA 2940 U2W trouble
To: None <pmialon@free.fr>
From: Frank van der Linden <frank@wins.uva.nl>
List: current-users
Date: 05/18/2000 12:33:04
On Thu, May 18, 2000 at 12:23:02PM +0000, pmialon@free.fr wrote:
> I run a 1.4.X.. And I have lot of problem when using my cdrom :
>
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x10
> cd0(ahc1:4:0): Check Condition on CDB: 0x08 03 46 f4 04 00
> SENSE KEY: Media Error
> INFO FIELD: 214772
> ASC/ASCQ: L-EC Uncorrectable Error
>
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x10
> cd0(ahc1:4:0): Check Condition on CDB: 0x08 03 46 f0 04 00
> SENSE KEY: Hardware Error
> INFO FIELD: 214768
>
> ASC/ASCQ: Tracking Servo Failure
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x10
> cd0(ahc1:4:0): Check Condition on CDB: 0x08 03 46 f0 04 00
> SENSE KEY: Media Error
> INFO FIELD: 214768
> ASC/ASCQ: L-EC Uncorrectable Error
>
> ahc1: target 4 synchronous at 20.0MHz,offset = 0x10
> cd0(ahc1:4:0): Check Condition on CDB:0x08 03 46 f0 04 00
> SENSE KEY: Media Error
> INFO FIELD: 214768
> ASC/ASCQ: Record Not Found
[...]
> ahc1 at pci0 dev 11 function 0
> ahc1: interrupting at irq 9
> ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
You can't be running 1.4.x.. do you mean 1.4X? 1.4.x (i.e. 1.4.1, 1.4.2)
doesn't support this controller, but -current (of which 1.4X was one
incarnation) does.
Anyway, these kind of problems do not look like software problems to me.
I'm afraid your CD-ROM drive (or the CD in it) might be dying.
- Frank