Hi !

I have tested the following machines :

1 - Proliant 5500 with SMART-2DH
2 - Proliant 1850R with SMART 3200
3 - Proliant 1600 with SMART-2SL

Here is the boot messages:
1) Proliant 5500
NetBSD 1.4V (INSTALL) #27: Tue Mar 21 17:30:07 GMT 2000
    root@pc1000.sports.gov.uk:/home/NetBSD/src/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 5 step 3
cpu0: Intel Pentium II (Deschutes) (686-class)
total memory = 255 MB
avail memory = 233 MB
using 3297 buffers containing 13188 KB of memory
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
fxp0 at pci0 dev 1 function 0: Intel i82557 Ethernet, rev 5
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:08:c7:f3:78:a6, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: supplying EUI64: 00:08:c7:ff:fe:f3:78:a6
vendor 0x0e11 product 0xa0f0 (miscellaneous system) at pci0 dev 12 function 0
not configured
vendor 0x1000 product 0x000f (SCSI mass storage, revision 0x14) at pci0 dev 13
function 0 not configured
vendor 0x1000 product 0x000f (SCSI mass storage, revision 0x14) at pci0 dev 13
function 1 not configured
vendor 0x1002 product 0x4756 (VGA display, revision 0x7a) at pci0 dev 14
function 0 not configured
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 15 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <CD-ROM CDU701-Q, , 1.0r> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 15
function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at pci0 dev
15 function 3 not configured
pchb0 at pci0 dev 16 function 0
pchb0: vendor 0x8086 product 0x84ca (rev. 0x03)
pchb1 at pci0 dev 18 function 0
pchb1: vendor 0x8086 product 0x84cb (rev. 0x02)
pchb2 at pci0 dev 19 function 0
pchb2: vendor 0x8086 product 0x84cb (rev. 0x02)
[...snip...]
Too bad, but nothing is probed.

2) Proliant 1850R
NetBSD 1.4V (INSTALL) #27: Tue Mar 21 17:30:07 GMT 2000
    root@pc1000.sports.gov.uk:/home/NetBSD/src/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 5 step 2
cpu0: Intel Pentium II (Deschutes) (686-class)
total memory = 255 MB
avail memory = 233 MB
using 3297 buffers containing 13188 KB of memory
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7192 (rev. 0x02)
vendor 0x1000 product 0x000f (SCSI mass storage, revision 0x14) at pci0 dev 6
function 0 not configured
vendor 0x1000 product 0x000f (SCSI mass storage, revision 0x14) at pci0 dev 6
function 1 not configured
tl0 at pci0 dev 7 function 0
tl0: Compaq ProLiant Integrated Netelligent 10/100 TX
tl0: Ethernet address 00:50:8b:73:0e:93
tl0: interrupting at irq 11
lxtphy0 at tl0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0 at tl0 phy 31: ThunderLAN 10baseT media interface, rev. 5
tlphy0: 10base2
tl0: supplying EUI64: 00:50:8b:ff:fe:73:0e:93
vendor 0x1002 product 0x4756 (VGA display, revision 0x7a) at pci0 dev 8 function
0 not configured
vendor 0x0e11 product 0xa0f0 (miscellaneous system) at pci0 dev 9 function 0 not
configured
ppb0 at pci0 dev 16 function 0: vendor 0x1014 product 0x0022 (rev. 0x07)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
cac0 at pci1 dev 0 function 0: Compaq SMART-2/P
cac0: interrupting at irq 15
ca0 at cac0 unit 0: RAID1 array
ca0: 8673MB, 2177 cyl, 255 head, 32 sec, 512 bytes/sect x 17764320 sectors
[...snip...]
Ok, it's a RAID Array, 2 x 8GB disks in hardware mirroring. The name (SMART-2/P)
is wrong.

3) Proliant 1600
NetBSD 1.4V (INSTALL) #27: Tue Mar 21 17:30:07 GMT 2000
    root@pc1000.sports.gov.uk:/home/NetBSD/src/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 5 step 1
cpu0: Intel Pentium II (Deschutes) (686-class)
total memory = 65152 KB
avail memory = 56380 KB
using 840 buffers containing 3360 KB of memory
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7192 (rev. 0x02)
vendor 0x1013 product 0x00b8 (VGA display, revision 0x45) at pci0 dev 11
function 0 not configured
ppb0 at pci0 dev 13 function 0: vendor 0x1011 product 0x0022 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
tl0 at pci1 dev 7 function 0
tl0: Compaq ProLiant Integrated Netelligent 10/100 TX
tl0: Ethernet address 00:08:c7:9f:95:cd
tl0: interrupting at irq 5
nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0 at tl0 phy 31: ThunderLAN 10baseT media interface, rev. 5
tlphy0: 10base2
tl0: supplying EUI64: 00:08:c7:ff:fe:9f:95:cd
vendor 0x1000 product 0x000f (SCSI mass storage, revision 0x14) at pci1 dev 9
function 0 not configured
vendor 0x1000 product 0x000f (SCSI mass storage, revision 0x14) at pci1 dev 9
function 1 not configured
vendor 0x0e11 product 0xa0f0 (miscellaneous system) at pci0 dev 14 function 0
not configured
ppb1 at pci0 dev 18 function 0: vendor 0x1014 product 0x0022 (rev. 0x07)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cac0 at pci2 dev 0 function 0: Compaq SMART-2/P
cac0: interrupting at irq 11
ca0 at cac0 unit 0: RAID5 array
ca0: 34727MB, 8716 cyl, 255 head, 32 sec, 512 bytes/sect x 71122560 sectors
[...snip...]
Ok, it's a RAID Array, 3 x 17GB disks in hardware RAID5. The name (SMART-2/P) is
wrong.

In conclusion, I don't know why the SMART-2DH is not probed, because it's a line
of product with ascendant compatibility (2SL, 2DH, 3200). Maybe the Proliant
5500 don't like NetBSD. I will investigate a little further with a different
computer and a 2DH.

Enjoy !


___________________________________________________________________________

L'integrite de ce message n'etant pas assuree sur Internet, la societe 
ne peut etre tenue responsable de son contenu.
Si vous n'etes pas destinataire de ce message, merci de le detruire et 
d'avertir l'expediteur.

The integrity of this message cannot be guaranteed on the Internet. 
The society cannot therefore be considered responsible for the contents.
If you are not the intended recipient of this message, then please delete 
it and notify the sender.