Here's the output from /kern/msgbuf from the latest snapshot's INSTALL
kernel (which of course is going to make a fool of me by actually
working..)

Jared

    tron@lyssa.zhadum.de:/src/NetBSD-current/src/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 0 step 0
cpu0: Cyrix 6x86MX (686-class)
total memory = 65152 KB
avail memory = 56360 KB
using 840 buffers containing 3360 KB of memory
BIOS32 rev. 0 found at 0xfb190
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0597 (rev. 0x04)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8598 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vendor 0x10de product 0x0028 (VGA display, revision 0x11) at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0586 (rev. 0x47)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586A IDE Controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU M1623TAU>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 1623 MB, 3298 cyl, 16 head, 63 sec, 512 bytes/sect x 3324996 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
wd1 at pciide0 channel 1 drive 0: <IBM-DALA-3540>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 516 MB, 1049 cyl, 16 head, 63 sec, 512 bytes/sect x 1057392 sectors
wd1: 32-bits data port
wd1: drive supports PIO mode 3, DMA mode 1
pciide0: secondary channel interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 3, DMA mode 1 (using DMA data transfers)
pchb1 at pci0 dev 7 function 3
pchb1: vendor 0x1106 product 0x3040 (rev. 0x10)
isa0 at pcib0
3COM 3C509B Ethernet card in PnP mode
3COM 3C509B Ethernet card in PnP mode
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
ep1 at isapnp0 port 0x210/16 irq 5
ep1: 3Com 3C509B EtherLink III 
ep1: supplying EUI64: 00:20:af:ff:fe:70:1a:7c
ep1: address 00:20:af:70:1a:7c, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep1: 10baseT, 10base5 (default 10baseT)
ep2 at isapnp0 port 0x220/16 irq 7
ep2: 3Com 3C509B EtherLink III 
ep2: address 00:20:af:70:1f:08, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep2: 10baseT, 10base5 (default 10baseT)
biomask ff45 netmask ffe5 ttymask ffe7
md0: internal 1536K image area
wd0: no disk label
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
wd0: no disk label
wd0: no disk label