Anyone else seen this?

[ preserving 258832 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4Q (YERFABLE) #65: Wed Jan 26 20:58:07 CST 2000
    khym@yerfable.metonymy.com:/usr/src.local/sys/arch/alpha/compile/YERFABLE
Digital AlphaPC 164 500 MHz
8192 byte page size, 1 processor.
total memory = 256 MB
(2472 KB reserved for PROM, 253 MB used by NetBSD)
avail memory = 206 MB
using 4860 buffers containing 38880 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2 (pass 2)
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
cia0: using BWX for PCI config access
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ep0 at pci0 dev 5 function 0: 3Com 3c595-TX 10/100 Ethernet
ep0: interrupting at eb164 irq 2
ep0: supplying EUI64: 00:a0:24:ff:fe:01:de:fa
ep0: address 00:a0:24:01:de:fa, 64KB word-wide FIFO, 3:1 Rx:Tx split
ep0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX (default 100baseTX)
ncr0 at pci0 dev 7 function 0: ncr 53c875 fast20 wide scsi
ncr0: interrupting at eb164 irq 1
ncr0: minsync=25, maxsync=254, maxoffs=16, 128 dwords burst, large dma fifo
ncr0: single-ended, open drain IRQ driver, using on-chip SRAM
ncr0: restart (scsi reset).
scsibus0 at ncr0: 16 targets, 8 luns per target
sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43)
vga0 at pci0 dev 9 function 0: Trident Microsystems TGUI 9660 (rev. 0xd3)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
pciide0 at pci0 dev 11 function 0: CMD Technology PCI0646
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
scsibus0: waiting 2 seconds for devices to settle...
probe(ncr0:0:0): Sense Error Code 0x0
sd0 at scsibus0 targ 0 lun 0: <Quantum, XP32150W, L915> SCSI2 0/direct fixed
sd0(ncr0:0:0): WIDE SCSI (16 bit) enabled
sd0(ncr0:0:0): 20.0 MB/s (100 ns, offset 15)
sd0: 2151 MB, 3907 cyl, 10 head, 112 sec, 512 bytes/sect x 4406960 sectors
probe(ncr0:0:1): Sense Error Code 0x0
probe(ncr0:0:2): Sense Error Code 0x0
probe(ncr0:0:3): Sense Error Code 0x0
probe(ncr0:0:4): Sense Error Code 0x0
probe(ncr0:0:5): Sense Error Code 0x0
probe(ncr0:0:6): Sense Error Code 0x0
probe(ncr0:0:7): Sense Error Code 0x0
IPsec: Initialized Security Association Processing.
root on sd0a dumps on sd0b
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
sd0(ncr0:0:0): Sense Error Code 0x0
no file system for sd0 (dev 0x800)
cannot mount root, error = 79
root device (default sd0a): halt
syncing disks... done
halted.


-- 
Name: Dave Huang     |   Mammal, mammal / their names are called /
INet: khym@bga.com   |   they raise a paw / the bat, the cat /
FurryMUCK: Dahan     |   dolphin and dog / koala bear and hog -- TMBG
Dahan: Hani G Y+C 24 Y++ L+++ W- C++ T++ A+ E+ S++ V++ F- Q+++ P+ B+ PA+ PL++