Hi,

I'm getting < 15 KB/sec on a local 10 Mb/s Ethernet between the NetBSD
machine (400 MHz K6-2/128M DRAM) and a BSDI 4.0 box with a PP150.  Between
the BSDI box and a 486/66 with 1.4.1 I'm seeing about 650 KB/sec.

The 400 MHz K6-2 box has an on-motherboard Davicom 10/100 ethernet that I'm
not using (but can't disable from the bios).  I'm using a Realtek 8039 PCI
card for ethernet connectivity.

The load average on the machine during ftp transfer is very low.

Oh, and I've noticed that when I telnet to the 400 MHz K6-2 box with 1.4P,
often after typing maybe only half-dozen characters, the next characters
are not echoed immediately - very disconcerting when you expect an 
immediate echo.

And pointers would be appreciated.  My dmesg is below.

-Mike



NetBSD 1.4P (USB) #8: Sat Jan 22 12:43:33 PST 2000
    mac@NetBSD:/usr/src/sys/arch/i386/compile/USB
cpu0: family 5 model 8 step c
cpu0: AMD K6-2 (586-class)
total memory = 119 MB
avail memory = 108 MB
using 1556 buffers containing 6224 KB of memory
BIOS32 rev. 0 found at 0xfdb60
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System 530 Host to PCI Bridge (rev. 0x02)
pciide0 at pci0 dev 0 function 1: Silicon Integrated System 5597/5598 IDE controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 1: <ATAPI CDROM, , V100T> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0 at pciide0 channel 0 drive 0: <IBM-DJNA-371800>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 17206MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 35239680 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
pcib0 at pci0 dev 1 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0xb3)
Silicon Integrated System 600 Power Mngmt Controller (undefined subclass 0x00) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 1 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x11)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 2 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Silicon Integrated System 530 GUI Accelerator+3D (rev. 0xa2)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-7 added (80x25, vt100 emulation)
ne2 at pci0 dev 9 function 0: RealTek 8029 Ethernet
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default auto
ne2: supplying EUI64: 00:80:c8:ff:fe:c0:f9:f7
ne2: Ethernet address 00:80:c8:c0:f9:f7
ne2: interrupting at irq 9
Davicom Semiconductor Davicom DM9102 10/100 Ethernet (ethernet network, revision 0x10) at pci0 dev 11 function 0 not configured
C-Media Electronics Inc CMI8738/C3DX PCI Audio Device (audio multimedia, revision 0x10) at pci0 dev 12 function 0 not configured
C-Media Electronics Inc HSP56 Audiomodem Riser (miscellaneous communications, revision 0x10) at pci0 dev 12 function 1 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask edfd netmask effd ttymask ffff
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub0 port 1
ugen0: Xirlink C-It Camera, rev 0.01/0.02, addr 2
ne2: starting DAD for fe80:0001::0280:c8ff:fec0:f9f7
ne2: DAD complete for fe80:0001::0280:c8ff:fec0:f9f7 - no duplicates found
wsmux1: connecting to wsdisplay0