Subject: Panic with kernel built this morning...
To: None <>
From: Mason Loring Bliss <>
List: current-users
Date: 01/01/2000 17:53:57
Content-Type: text/plain; charset=us-ascii

Hey, all. I built -current on my i386 this morning, and then this afternoon
did an automated CD burn. My machine evidently panicked and rebooted. I don't
see anything obvious in my logs, but the only thing the box was doing out of
the ordinary was the CD burn, and since I was asleep during the crash, I don't
know if that was it or not... I've randomly seen panics in the past when my
box tried to start fixing a disk in my Memorex ATAPI CD-RW drive.`

All I know for sure:

Jan  1 15:08:50 acheron savecore: reboot after panic: pmap_unwire: invalid (unmapped) va

If I can dredge up any useful information, tell me what to do and I'll do it.
My dmesg is attached. (The only other thing I can think of is that I'd built
my new kernel, rebooted, built my new userland, and NOT then rebooted before
burning the disk... Does this matter? I didn't think it did, but I don't
*really* know that.) In the meantime, I'll see if I can reproduce the panic.

    Mason Loring Bliss  They also surf who
awake ? sleep : dream;  only stand on waves.

Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg

NetBSD 1.4P (MLB) #4: Sat Jan  1 02:27:19 EST 2000
cpu0: family 5 model 6 step 2
cpu0: AMD K6 (586-class)
total memory = 65152 KB
avail memory = 58440 KB
using 840 buffers containing 3360 KB of memory
BIOS32 rev. 0 found at 0xfb2e0
mainbus0 (root)
pnpbios0 at mainbus0: code f0000, data f0000, entry bec8
pnpbios0: 15 nodes, max len 69
PNP0000 (io 20-21 a0-a1, irq 2) at pnpbios0 index 0 ignored
PNP0200 (io 0-f 81-83 87 89-8b 8f-91 c0-df, dma 4) at pnpbios0 index 1 ignored
PNP0100 (io 40-43, irq 0) at pnpbios0 index 2 ignored
PNP0B00 (io 70-71, irq 8) at pnpbios0 index 3 ignored
PNP0303 (io 60 64, irq 1) at pnpbios0 index 4 ignored
PNP0800 (io 61) at pnpbios0 index 5 ignored
PNP0C04 (io f0-ff, irq 13) at pnpbios0 index 6 ignored
PNP0C01 (mem 0-9ffff fffe0000-ffffffff 100000-3ffffff) at pnpbios0 index 7 ignored
PNP0C02 (mem f0000-f3fff f4000-f7fff f8000-fbfff fc000-fffff) at pnpbios0 index 8 ignored
PNP0A03 (io 4d0-4d1 cf8-cff 480-48f 4000-403f 5000-501f) at pnpbios0 index 9 ignored
PNP0C02 (io 208-20f) at pnpbios0 index 11 ignored
com0 at pnpbios0 index 12 (PNP0501)
com0: io 3f8-3ff, irq 4
com0: ns16550a, working fifo
PNP0700 (io 3f2-3f5, irq 6, dma 2) at pnpbios0 index 13 ignored
lpt0 at pnpbios0 index 14 (PNP0400)
lpt0: io 378-37f, irq 7
com1 at pnpbios0 index 16 (PNP0501)
com1: io 2f8-2ff, irq 3
com1: ns16550a, working fifo
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
Intel 82439TX System Controller (MTXC) (host bridge, revision 0x01) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 90680D4>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6485MB, 13176 cyl, 16 head, 63 sec, 512 bytes/sect x 13281408 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd1 at pciide0 channel 0 drive 1: <Maxtor 91366U4>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 13029MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 26684784 sectors
wd1: 32-bits data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <Memorex CRW-1622, AH1234567892123  L2, D4.0> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 3, DMA mode 1
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 3
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 3 not configured
vga0 at pci0 dev 10 function 0: Nvidia Corporation Riva TNT (rev. 0x04)
wsdisplay0 at vga0: console (80x25, sun emulation)
ne0 at pci0 dev 11 function 0: RealTek 8029 Ethernet
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default auto
ne0: Ethernet address 00:40:05:6a:5e:fe
ne0: interrupting at irq 10
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
sb0 at isa0 port 0x220-0x237 irq 7 drq 1 drq2 5: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
ep0 at isapnp0 port 0x210/16 irq 5
ep0: 3Com 3C509B EtherLink III 
ep0: address 00:10:4b:02:0d:fc, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT (default 10baseT)
biomask fb45 netmask ff65 ttymask ffe7
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ums0 at uhub0 port 2 configuration 1 interface 0
ums0: Logitech USB-PS/2 Mouse, rev 1.00/1.20, addr 2, iclass 3/1
ums0: 3 buttons
wsmouse0 at ums0 mux 0
IP Filter: initialized.  Default = pass all, Logging = enabled
IP Filter: v3.3.6
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, sun emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)