Subject: pkg_install
To: current-users <current-users@netbsd.org>
From: Bob Nestor <rnestor@augustmail.com>
List: current-users
Date: 08/23/1999 06:27:44 
I'm sure this one is obvious, but I'm stumped.  While building some 
packages I get a message that my pkg_install is out of date and I need to 
do a make install in pkgsrc/pkgtools/pkg_install.  But when trying to do 
that I get a message that pkg_install is already upto date.  What's the 
magic to get this to work?

thanks
-bob
quot; is a Venus Sirius 740, el crappo i740 AGP card. Fry's, $40. 2. "uhub1: vendor 0x050f product 0x0003" is a SIIG USB MiniHub 4000P, a cute little iMac-ish 4-port hub. Fry's, $40. 3. "BTC USB Keyboard and Mouse" is a GQ 'great quality' USB keyboard with a little PS/2 mouse port on the side. Fry's, $20. 4. "Cypress Sem Cypress USB Mouse" is really a 3-button Belkin USB mouse. pcconnection.com (I think), $15. The mice are actually a red herring; I just wanted to make sure the hub works with all four ports occupied. The real purpose of this is to prove the idea of a multi-headed text workstation by actually constructing one with three vga's and three keyboards. NetBSD 1.4 (GENERIC) #1: Sat Aug 21 18:31:45 PDT 1999 root@vader.wrs.com:/usr/src/sys/arch/i386/compile/GENERIC cpu0: family 5 model 4 step 3 cpu0: Intel Pentium/MMX (586-class) real mem = 33161216 avail mem = 27238400 using 430 buffers containing 1761280 bytes of memory mainbus0 (root) pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o enabled, memory enabled pchb0 at pci0 dev 0 function 0 pchb0: Acer Labs M1541 Host-PCI Bridge (rev. 0x04) ppb0 at pci0 dev 1 function 0: Acer Labs product 0x5243 (rev. 0x04) pci1 at ppb0 bus 1 pci1: i/o enabled, memory enabled Intel product 0x7800 (VGA display, revision 0x21) at pci1 dev 0 function 0 not configured ohci0 at pci0 dev 2 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03) ohci0: interrupting at irq 10 ohci0: OHCI version 1.0, legacy support usb0 at ohci0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at uhub0 port 1 uhub1: vendor 0x050f product 0x0003, class 9/0, rev 1.00/1.00, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0 at uhub1 port 1 configuration 1 interface 0 ukbd0: BTC USB Keyboard and Mouse, rev 1.00/21.10, addr 3, iclass 3/1 wskbd0 at ukbd0 ums0 at uhub1 port 1 configuration 1 interface 1 ums0: BTC USB Keyboard and Mouse, rev 1.00/21.10, addr 3, iclass 3/0 ums0: 3 buttons and Z dir. wsmouse0 at ums0 ums1 at uhub1 port 2 configuration 1 interface 0 ums1: Cypress Sem Cypress USB Mouse, rev 1.00/0.00, addr 4, iclass 3/1 ums1: 3 buttons wsmouse1 at ums1 ukbd1 at uhub1 port 3 configuration 1 interface 0 ukbd1: BTC USB Keyboard and Mouse, rev 1.00/21.10, addr 5, iclass 3/1 wskbd1 at ukbd1 ums2 at uhub1 port 3 configuration 1 interface 1 ums2: BTC USB Keyboard and Mouse, rev 1.00/21.10, addr 5, iclass 3/0 ums2: 3 buttons and Z dir. wsmouse2 at ums2 ums3 at uhub1 port 4 configuration 1 interface 0 ums3: Cypress Sem Cypress USB Mouse, rev 1.00/0.00, addr 6, iclass 3/1 ums3: 3 buttons wsmouse3 at ums3 pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xb4) ne2 at pci0 dev 14 function 0: RealTek 8029 Ethernet ne2: 10base2, 10baseT, 10baseT-FDX, auto, default auto ne2: Ethernet address 00:80:c8:c1:8a:78 ne2: interrupting at irq 11 pciide0 at pci0 dev 15 function 0: Acer Labs M5229 UDMA IDE Controller pciide0: bus-master DMA support present pciide0: primary channel configured to compatibility mode wd0 at pciide0 channel 0 drive 0: <ST33221A> wd0: drive supports 32-sector pio transfers, lba addressing wd0: 3077MB, 6253 cyl, 16 head, 63 sec, 512 bytes/sect x 6303024 sectors wd0: 32-bits data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 wd1 at pciide0 channel 0 drive 1: <QUANTUM LPS170A> wd1: drive supports 8-sector pio transfers, chs addressing wd1: 162MB, 1011 cyl, 15 head, 22 sec, 512 bytes/sect x 333630 sectors wd1: 32-bits data port wd1: drive supports PIO mode 3, DMA mode 1 pciide0: primary channel interrupting at irq 14 pciide0: secondary channel configured to compatibility mode atapibus0 at pciide0 channel 1 cd0 at atapibus0 drive 0: <FX162T4, , p01> type 5 cdrom removable cd0: 32-bits data port cd0: drive supports PIO mode 3, DMA mode 2 sd0 at atapibus0 drive 1: <IOMEGA ZIP 100 ATAPI, , 23.D> type 0 direct removable sd0: drive offline sd0: 32-bits data port pciide0: secondary channel interrupting at irq 15 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers) wd1(pciide0:0:1): using PIO mode 3, DMA mode 1 (using DMA data transfers) cd0(pciide0:1:0): using PIO mode 3, DMA mode 1 (using DMA data transfers) sd0(pciide0:1:1): using PIO mode 3 epic0 at pci0 dev 16 function 0: SMC EPIC/100 Fast Ethernet epic0: interrupting at irq 11 epic0: SMC9432TX, Ethernet address 00:e0:29:37:35:dc qsphy0 at epic0 phy 3: QS6612 10/100 media interface, rev. 1 qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vga1 at pci0 dev 18 function 0: S3 ViRGE (rev. 0x06) wsdisplay0 at vga1: console (80x25, vt100 emulation) S3 Trio64V2/DX (VGA display, revision 0x16) at pci0 dev 20 function 0 not configured isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo lpt0 at isa0 port 0x378-0x37b irq 7 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd2 at pckbd0: console keyboard opmsprobe: command error pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec isapnp0: read port 0x203 isapnp0: <PnP Sound Chip, @@@1001, , > port 0x220/16 irq 5 drq 1,0 not configured isapnp0: <PnP Sound Chip, @H@1001, , > port 0x388/8 not configured isapnp0: <PnP Sound Chip, @P@1001, , > port 0x200/8 not configured isapnp0: <PnP Sound Chip, @X@1001, , > port 0x330/2 irq 9 not configured biomask c440 netmask cc40 ttymask ccc2 wscons: wskbd2 glued to wsdisplay0 (console) WARNING: old BSD partition ID! boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs # eof Todd Whitesel toddpw @ best.com