Well, I enabled logging, unfortunately this is the entire log file:

	Log started at: Tue Feb  2 23:01:45 1999

Also, there is no dmesg on the boot floppies, so I had to cat /kern/msgbuf:

NetBSD 1.3I (INSTALL) #7: Mon Feb  1 15:43:15 MET 1999
    he@hugin.runit.sintef.no:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 49938432
avail mem = 42622976
using 635 buffers containing 2600960 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1250 (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7000 (rev. 0x00)
pciide0 at pci0 dev 7 function 1: Intel 82371SB IDE Interface (PIIX3)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL_TM2550A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 2445MB, 4969 cyl, 16 head, 63 sec, 512 bytes/sect x 5008752 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
vendor 0x5333 product 0x88f0 (VGA display) at pci0 dev 19 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
isapnp0: <Creative SB32 PnP, CTL0031, , Audio> port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5 not configured
wdc2 at isapnp0 port 0x168/8,0x36e/2 irq 10
wdc2: Creative SB32 PnP IDE
isapnp0: <Creative SB32 PnP, CTL0021, , WaveTable> port 0x620/4 not configured
isapnp0: <Creative SB32 PnP, CTL7001, PNPB02F, Game> port 0x200/8 not configured
isapnp0: <Creative SB32 PnP, CTL0051, , StereoEnhance> port 0x100/1 not configured
isapnp0: <U.S.Robotics Inc. Sportster 33., USR0002, , > port 0x2f8/8 irq 3 not configured
biomask 4440 netmask 4440 ttymask 4442
md0: internal 1587K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
<3>uid 0 on /: file system full



Hope this helps,
Yoav