Subject: Re: Alpha 1.3I snapshot
To: None <firstname.lastname@example.org>
From: Mito Osamu <email@example.com>
Date: 01/29/1999 20:43:15
>>I have just uploaded a new snapshot for alpha to
>>The snapshot seems to be exremely stable, and I have been running with it for
>>about 6-7 days now. I am also currently uploading the sources for this
>>snapshot. They should probably be done uploading around 18:00MST today.. the
>>complete size of the sources is about 57Megs.
>>Please let me know if you have any problems with this snapshot. I will
>>probably be removing the old one in a week or two, if nobody reports anything
>>bad about the new one.
Don't work on My ALPHA STATION 200 4/100.
(boot dka0.0.0.6.0 -flags a)
block 0 of dka0.0.0.6.0 is a valid boot block
reading 15 blocks from dka0.0.0.6.0
bootstrap code read in
base = 1f6000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1e8000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
NetBSD/Alpha Primary Boot
Jumping to entry point...
NetBSD/Alpha Secondary Boot, Revision 1.9
(ross@zeta, Fri Dec 11 17:21:15 PST 1998)
VMS PAL revision: 0x1000000010530
OSF PAL rev: 0x1000000020123
Switch to OSF PAL code succeeded.
Boot flags: a
Entering netbsd at 0xfffffc0000301040...
[ preserving 226000 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.3I (GENERIC) #0: Mon Jan 25 00:49:42 MST 1999
AlphaStation 200 4/100, 100MHz
8192 byte page size, 1 processor.
real mem = 67108864 (2064384 reserved for PROM, 65044480 used by NetBSD)
avail mem = 53747712
using 794 buffers containing 6504448 bytes of memory
cpu0 at mainbus0: ID 0 (primary), 21064A (pass 1.1)
apecs0 at mainbus0: DECchip 21071 Core Logic chipset
apecs0: DC21071-CA pass 2, 64-bit memory bus
apecs0: DC21071-DA pass 2
fatal kernel trap:
trap entry = 0x2 (memory management fault)
a0 = 0xffffffff8028081c
a1 = 0x1
a2 = 0x1
pc = 0xfffffc00004f4f84
ra = 0xfffffc00004f4f7c
curproc = 0xfffffc00005ae8f8
pid = 0, comm =
Stopped in at Debugger+0x4: ret zero,(ra)