Subject: Re: Compact FLASH, NetBSD-current, PCMCIA
To: Jukka Marin <>
From: msaitoh <>
List: current-users
Date: 01/25/1999 10:20:10
 > I was trying to get Compact FLASH cards working on my ThinkPad 310 again.
 > The system complains that the card never becomes ready.
 > I increased the delays in i82365.c, but this didn't help a bit.  My SanDisk
 > Compact FLASH manual says the maximum time for the card to become active
 > after a reset is 400 ms, which is much longer than the original delays in
 > i82365.c - but inreasing the delays to 500 ms or even more didn't help,
 > so I guess there's some other problem there, too.

Current i82365.c doesn't check card's VCC, VPP, and device speed.
I suspect this is the reason for that problem...

 >                                                    I haven't found the
 > 82365 datasheet on the net, so I don't know if these signals are
 > inverting or not.

 For example:

These datasheet describes 82365SL's registers.

		SAITOH Masanobu (,
		University of Electro-Communications