----Next_Part(Fri_Jan__1_07:44:02_1999_542)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi,

A Happy New Year to All!

I just got this cool thin B5 notebook PC and trying to set up NetBSD
on it.  I'm using the latest i386 snapshot.

Installing and running NetBSD were no problem, but to get XFree86 to
run on it, I needed some help from other people already running
XFree86, albeit all of them running FreeBSD, not NetBSD.

Anyway, now the XF86_SVGA server starts up and I can see the screen,
but the pointing device doesn't work.  In boot message, I get:

> pms0 at pc0 irq 12

and XF86Config file's "Pointer" section looks like:

> Section "Pointer"
>     Protocol    "PS/2"
>     Device      "/dev/pms0"
>     Emulate3Buttons
>     Emulate3Timeout    50
> EndSection

When I try to move the pointer, it jumps all over the screen (mostly
within the left half) and fvwm menus pop up and close even though I'm
not touching the buttons.  If I press a button, the pointer jumps.

Is anybody running NetBSD on a 3010 and has seen such a problem?  If
so, how can I get it to work?

BTW, I've attached the entire boot message just in case anyone's
interested.

Thanks,

Ken

----Next_Part(Fri_Jan__1_07:44:02_1999_542)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

NetBSD 1.3I (GENERIC) #6: Tue Dec  8 09:51:27 MET 1998
    he@maaltrost.runit.sintef.no:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 5 model 8 step 1
cpu0: Intel Pentium (586-class)
real mem  = 66781184
avail mem = 58662912
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Toshiba Info Systems (2nd PCI Vendor ID) product 0x0601 (rev. 0xa2)
Neomagic product 0x0004 (VGA display, revision 0x01) at pci0 dev 4 function 0 not configured
ohci0 at pci0 dev 11 function 0: NEC product 0x0035 (rev. 0x02)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0
ohci0: 2 downstream ports
usb0 at ohci0
uhub0 at usb0
uhub0: NEC OHCI root hub (class 9/1) (rev 1.00/1.00), addr 1
Toshiba Info Systems (2nd PCI Vendor ID) product 0x0701 (miscellaneous communications, revision 0x23) at pci0 dev 17 function 0 not configured
Toshiba Info Systems (2nd PCI Vendor ID) product 0x060f (CardBus bridge, revision 0x06) at pci0 dev 19 function 0 not configured
Toshiba Info Systems (2nd PCI Vendor ID) product 0x060f (CardBus bridge, revision 0x06) at pci0 dev 19 function 1 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK4310MAT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4126MB, 8944 cyl, 15 head, 63 sec, 512 bytes/sect x 8452080 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
lpt0 at isa0 port 0x378-0x37b irq 7
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pms0 at pc0 irq 12
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ne2 at pcmcia0 function 0 port 0x340-0x34f port 0x350-0x35f
ne2: I-O DATA PCLA/T Ethernet
ne2: Ethernet address 00:00:e8:67:e1:01
pcmcia1 at pcic0 controller 0 socket 1
com3 at pcmcia1 function 0 port 0x2f8-0x2ff: serial device
com3: ns16550a, working fifo
isapnp0: no ISA Plug 'n Play devices found
biomask 4840 netmask 4840 ttymask 58ca
WARNING: old BSD partition ID!
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 9

----Next_Part(Fri_Jan__1_07:44:02_1999_542)----