Subject: de0 problems
To: (NetBSD/current-users Maillist) <current-users@netbsd.org>
From: David Brownlee <abs@anim.dreamworks.com>
List: current-users
Date: 11/25/1998 16:43:18
	Unsure whether this is a i386 or MI problems, so posting to both
	lists, please trim replies to appropriate list :)

	I'm trying to get a Tulip based Cogent network card to work on
	a 10baseT network, without any luck.

	Tried both a 1.3.2 boot floppy, and the 1.3H snapshot.

	It sees the card, I can iconfig it up, but I can't ping any other
	hosts (no data seen on network), and other hosts cannot ping it.

	Does anyone have any ideas on this - card functions perfectly
	under another OS in same machine (nextstep in this case)

NetBSD 1.3H (INSTALL) #1: Sun Nov  1 15:50:04 MET 1998
    he@maaltrost.runit.sintef.no:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 150601728
avail mem = 136077312
using 1864 buffers containing 7634944 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 2
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x04a3 (rev. 0x11)
ncr0 at pci0 dev 1 function 0: ncr 53c810 fast10 scsi
ncr0: unable to map device registers
pcib0 at pci0 dev 2 function 0
pcib0: vendor 0x8086 product 0x0484 (rev. 0x88)
ahc1 at pci0 dev 6 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc1 channel 0: 16 targets
ahc1: target 0 using 16Bit transfers
ahc1: target 0 synchronous at 10.0MHz, offset = 0x8
sd0 at scsibus0 targ 0 lun 0: <WDIGTL, ENTERPRISE, 1.43> SCSI2 0/direct fixed
sd0: 2077MB, 5720 cyl, 4 head, 185 sec, 512 bytes/sect x 4254819 sectors
ahc1: target 4 using 16Bit transfers
ahc1: target 4 synchronous at 10.0MHz, offset = 0x8
sd1 at scsibus0 targ 4 lun 0: <SEAGATE, ST39102LW, 0004> SCSI2 0/direct fixed
sd1: 8683MB, 6962 cyl, 12 head, 212 sec, 512 bytes/sect x 17783240 sectors
vendor 0x105d product 0x2339 (VGA display, revision 0x02) at pci0 dev 7 function 0 not configured
de0 at pci0 dev 8 function 0
de0: interrupting at irq 10
de0: Cogent 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:92:96:39:cb
de0: enabling 10baseT port
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 840 netmask c40 ttymask c42
md0: internal 1537K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs

		David/absolute

          -=-  "Give me one last video, just dressed in black"  -=-