-----BEGIN PGP SIGNED MESSAGE-----


  [I had the same problem with 1.3]
  My 3c589 gets probed properly. When it gets configured with the 1.3.1
install disk, it gets irq 11. IRQ 11 does not seem to work with this
card.

  If I build a kernel that has fewer devices, then I can free up enough
IRQs <9 and it works (typically, irq 5 gets used).
  If I put my PCMCIA 28.8 modem in, I can use it just fine. 
  I noticed last time (with 1.3) that the irqmask from the 3c589 says
that any irq can be used. The 28.8 modem is far more specific about its
needs.

  I get a phantom com1 probed, btw. 

  Does this ring a bell to anyone? I'm installing in a new PCMCIA HD
that I just bought for it, so I'm happy to try anything people would 
like me to.
  {I still have my 135Mb drive to swap back in that works}

The failing dmesg output:

Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3.1 (INSTALL) #0: Wed Apr  8 01:20:41 EDT 1998
    perry@frankenstein.piermont.com:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: Intel 486DX (486-class)
real mem  = 8192000
avail mem = 5111808
using 125 buffers containing 512000 bytes of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <TOSHIBA MK2124FC>
wd0: 124MB, 934 cyl, 16 head, 17 sec, 512 bytes/sec
wd0: using 1-sector 16-bit pio transfers, chs addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 7
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
ep1 at pcmcia0 function 0 port 0x300-0x30f: 3Com 3C589 Ethernet
ep1: MAC address 00:a0:24:ac:5c:52
ep1: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui/bnc (default utp)
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcic1 at isa0 port 0x3e2-0x3e3 iomem 0xd4000-0xd7fff: using irq 9
pcic1: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia3 at pcic1 controller 1 socket 0
biomask 4040 netmask 4040 ttymask 42c2
md0: internal 1537K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
pcmcia0: card irq 11

  The kernel that I have that works, as long as my 28.8 isn't also
inserted:

pcvt: doreset() - timeout writing keyboard init command
pcvt: doreset() - response != OK and response < 0
opyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3_BETA (MORDEN) #3: Sun Mar  8 20:04:14 EST 1998
    mcr@istari.sandelman.ottawa.on.ca:/j/netbsd/src/sys/arch/i386/compile/MORDEN
cpu0: Intel 486DX (486-class)
real mem  = 8192000
avail mem = 7032832
using 125 buffers containing 512000 bytes of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 drive 0: <TOSHIBA MK2124FC>
wd0: 124MB, 934 cyl, 16 head, 17 sec, 512 bytes/sec
wd0: using 1-sector 16-bit pio transfers, chs addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: wd90c11, 80/132 col, color, 8 scr, mf2-kbd, [R3.32]
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version 2.0 or 2.01
pcmcia0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
ep0 at pcmcia0 function 0 port 0x380-0x38f: 3Com 3C589 Ethernet
ep0: MAC address 00:a0:24:ac:5c:52
ep0: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui/bnc (default utp)
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcic: does not support memory and I/O cards, ignored (ident=40)
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic1 at isa0 port 0x3e2-0x3e3 iomem 0xd4000-0xd7fff: using irq 5
pcic: does not support memory and I/O cards, ignored (ident=40)
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic1: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia3 at pcic1 controller 1 socket 0
apm0 at mainbus0: Power Management spec V1.1 (BIOS mgmt disabled)
apm0: battery life expectancy: 0%
apm0: A/C state: on
apm0: battery charge state:
apm0: estimated 0m
biomask 4040 netmask 4040 ttymask 40ea
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 9

   :!mcr!:            |  Sandelman Software Works Corporation, Ottawa, ON  
   Michael Richardson |	SSH IPsec: http://www.ssh.fi/. Secure, strong, international
 Personal: mcr@sandelman.ottawa.on.ca. PGP key available.
 Corporate: sales@sandelman.ottawa.on.ca. 




  

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia
Charset: latin1
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQB1AwUBNUAOkdiXVu0RiA21AQFtSAMAqTP00ILmvC6rw852GCZ1S68xC6SZ0BJ1
xc/PAxG4Blh6uAEd2radyOz9I7/WOec1XzGIbfYOHQjfz99RWO2iMZDkna3yzA98
xkN2scS9ujiCsF4/Z1paACyrPW76Iou1
=JDr7
-----END PGP SIGNATURE-----