Hello current users,

I am having some problems on -current that seem to be persistant and (waiting
for others to complain) seems to be un notished.

1) Sinds a few days (after the 19th) my perl program aborts with
 _Socket_IPBROADCAST not to be found in socket.so.
It seems to be related to the error in rtld (shoot me if I am wrong)
rtld problem:
- /usr/src/gnu/usr.bin/ld/rtld/rtld.c: In function `__dlopen':
- /usr/src/gnu/usr.bin/ld/rtld/rtld.c:1585: `RTLD_GLOBAL' undeclared (first use this function)
- /usr/src/gnu/usr.bin/ld/rtld/rtld.c:1585: (Each undeclared identifier is reported only once
- /usr/src/gnu/usr.bin/ld/rtld/rtld.c:1585: for each function it appears in.)
- *** Error code 1
 adding a _ to RTLD_GLOBAL makes rtld compile fine but ....


2)
On my compaq (Isn't every digital computer a Compaq) I have an empty 2nd
ide controller (no drives). Sinds the atapi mods from CGD wdc? detects
HUGE negative storage areas connected to that controller. Atapi barfs on
it and changing atapi? into atapi0 (on wdc0 only thus) gives me a kernel
capable of surviving this but the seek test into the negative storage
gives still errors (non fatal) I just disable the 2nd controller too
in my config.... But is should not have to be. 
Here is a dmesg output:

NetBSD 1.3D (PC5098) #0: Thu Feb 26 14:27:55 MET 1998
    root@pc5098:/usr/src/sys/arch/i386/compile/PC5098
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 33161216
avail mem = 28721152
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439HX System Controller (TXC) (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
Intel 82371SB IDE Interface (PIIX3) (IDE mass storage, interface 0x80) at pci0 dev 7 function 1 not configured
Cirrus Logic CL-GD5436 (VGA display) at pci0 dev 15 function 0 not configured
isa0 at pcib0
aic0 at isa0 port 0x140-0x15f irq 10
scsibus0 at aic0: 8 targets
ss0 at scsibus0 targ 1 lun 0: <HP, C1790A, 3208> SCSI2 3/processor fixed
ss0: HP ScanJet IIcaic0: BUS FREE while not idle; state=2

aha0 at isa0 port 0x330-0x333 irq 11 drq 5
aha0: model AHA-1540A/1542A/1542B, firmware 0.5
aha0: async, parity
scsibus1 at aha0: 8 targets
cd0 at scsibus1 targ 3 lun 0: <SONY, CD-ROM CDU-76S, 1.1a> SCSI2 5/cdrom removable
st0 at scsibus1 targ 5 lun 0: <EXABYTE, EXB-8200, 2640> SCSI1 1/sequential removable
st0: drive empty
ne0 at isa0 port 0x280-0x29f irq 9
ne0: NE2000 Ethernet
ne0: Ethernet address 00:00:b4:34:70:12
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 drive 0: <Maxtor 82100A4>
wd0: 2014MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
wdc1 at isa0 port 0x170-0x177 irq 15
wd1 at wdc1 drive 0: <\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_>
wd1: -299044MB, -8321 cyl, -8321 head, -8321 sec, 512 bytes/sec
wd1: using 16-sector 16-bit pio transfers, lba addressing
wd2 at wdc1 drive 1: <\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_\M-_>
wd2: -299044MB, -8321 cyl, -8321 head, -8321 sec, 512 bytes/sec
wd2: using 16-sector 16-bit pio transfers, lba addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: unknown cirrus, 80 col, color, 8 scr, mf2-kbd, [R3.32]
pms0 at vt0 irq 12
spkr0 at vt0 port 0x61
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask cc40 netmask ce40 ttymask dec2
wdc1(0): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd1: wdccontrol: recal failed (2)
wdc1(0): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd1: wdccontrol: recal failed (2)
wdc1(0): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd1: wdccontrol: recal failed (2)
wd1d: wdc_ata_start hard error reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0)
wdc1(0): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd1: wdccontrol: recal failed (2)
wdc1(0): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd1: wdccontrol: recal failed (2)
wdc1(0): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd1: wdccontrol: recal failed (2)
wd1d: wdc_ata_start hard error reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0)
wd1: dos partition I/O error
wdc1(1): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd2: wdccontrol: recal failed (2)
wdc1(1): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd2: wdccontrol: recal failed (2)
wdc1(1): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd2: wdccontrol: recal failed (2)
wd2d: wdc_ata_start hard error reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0)
wdc1(1): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd2: wdccontrol: recal failed (2)
wdc1(1): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd2: wdccontrol: recal failed (2)
wdc1(1): lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wd2: wdccontrol: recal failed (2)
wd2d: wdc_ata_start hard error reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0)
wd2: dos partition I/O error
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: initialized.  Default = pass all, Logging = disabled


---------------------------------------------

3) I am using xntpd with a radio clock (dcf77) to keep track of time.

xntpd sindse 2 weeks tels me that the fcntl(F_SETOWN , PID) of the /dev/refclock0
is not possible (it is tty0 - hard link) anymore and now only uses the
internal clock.


---------------------------------------------

If anything is familiar, please fix.
If I am doing anything wrong , please tell me. 

Email to gvdg@concepts.nl , I read the newsgroups via sup (!)

Regards, Gerard.

G.J. van der Grinten         -    gvdg@concepts.nl