Subject: Re: who uses the build-in uucp with a modem?
To: Martin Husemann <martin@rumolt.teuto.de>
From: David Wetzel <dave@turbocat.de>
List: current-users
Date: 11/30/1997 12:14:02
--NeXT-Mail-1800313708-1
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

> From: Martin Husemann <martin@rumolt.teuto.de>

> So maybe uucico doesn't configure the com port correctly? Have you
> tried to compare stty -a -f /dev/tty... output when uucico is running
> against when pppd is running?

PPP:

alice# stty -a -f /dev/tty01
ppp disc; speed 115200 baud; 0 rows; 0 columns;
lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl
        -echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin
        -nokerninfo -extproc
iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff -ixany -imaxbel ignbrk
        -brkint -inpck ignpar -parmrk
oflags: -opost -onlcr -ocrnl -oxtabs
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb crtscts -mdmbuf
        -cdtrcts
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
        eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
        min = 1; quit = ^\; reprint = ^R; start = ^Q; status = <undef>;
        stop = ^S; susp = ^Z; time = 0; werase = ^W;

UUCP:

alice# stty -a -f /dev/tty01
speed 115200 baud; 0 rows; 0 columns;
lflags: -icanon -isig -iexten -echo -echoe -echok echoke -echonl echoctl
        -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo
        -extproc
iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff ixany -imaxbel -ignbrk
        -brkint -inpck -ignpar -parmrk
oflags: -opost onlcr -ocrnl oxtabs
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb crtscts -mdmbuf
        -cdtrcts
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
        eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
        min = 10; quit = ^\; reprint = ^R; start = ^Q; status = <undef>;
        stop = ^S; susp = ^Z; time = 1; werase = ^W;


DIFF:

(-echoctl -ixany ignbrk ignpar -onlcr -oxtabs time = 0 Or did I miss one?)


What now?

---
   _  _
 _(_)(_)_  David Wetzel, Turbocat's Development,
(_) __ (_) Buchhorster Strasse, D-16567 Muehlenbeck/Berlin, FRG,
  _/  \_   Fax +49 33056 82835 NeXTmail dave@turbocat.de
 (______)  http://www.turbocat.de/
           DEVELOPMENT * CONSULTING * ADMINISTRATION

--NeXT-Mail-1800313708-1
Content-Type: text/enriched; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

> From: Martin Husemann <<martin@rumolt.teuto.de>


> So maybe uucico doesn't configure the com port correctly? Have you

> tried to compare stty -a -f /dev/tty... output when uucico is running

> against when pppd is running?


PPP:


<fixed><fontfamily><param>Ohlfs</param><smaller>alice# stty -a -f /dev/tty01

ppp disc; speed 115200 baud; 0 rows; 0 columns;

lflags: -icanon -isig -iexten -echo -echoe -echok -echoke  -echonl

         -echoctl  -echoprt -altwerase -noflsh -tostop -flusho -pendin

        -nokerninfo -extproc

iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff  -ixany  -imaxbel  ignbrk

        -brkint -inpck  ignpar  -parmrk

oflags: -opost  -onlcr  -ocrnl  -oxtabs

cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb crtscts -mdmbuf

        -cdtrcts

cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <<undef>;

        eol2 = <<undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;

         min = 1;  quit = ^\; reprint = ^R; start = ^Q; status = <<undef>;

        stop = ^S; susp = ^Z;  time = 0 ; werase = ^W;


UUCP:


alice# stty -a -f /dev/tty01

speed 115200 baud; 0 rows; 0 columns;

lflags: -icanon -isig -iexten -echo -echoe -echok echoke -echonl echoctl

        -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo

        -extproc

iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff ixany -imaxbel -ignbrk

        -brkint -inpck -ignpar -parmrk

oflags: -opost onlcr -ocrnl oxtabs

cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb crtscts -mdmbuf

        -cdtrcts

cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <<undef>;

        eol2 = <<undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;

        min = 10; quit = ^\; reprint = ^R; start = ^Q; status = <<undef>;

        stop = ^S; susp = ^Z; time = 1; werase = ^W;



</smaller></fontfamily></fixed>DIFF:


(-echoctl -ixany ignbrk ignpar -onlcr -oxtabs time = 0 Or did I miss one?)



What now?


---

   _  _

 _(_)(_)_  David Wetzel, Turbocat's Development,

(_) __ (_) Buchhorster Strasse, D-16567 Muehlenbeck/Berlin, FRG,

  _/  \_   Fax +49 33056 82835 NeXTmail dave@turbocat.de

 (______)  http://www.turbocat.de/

           DEVELOPMENT * CONSULTING * ADMINISTRATION

--NeXT-Mail-1800313708-1--