Hello!

I do not get what I expect with my UUCP connection.

uucico harvey - (...) Calling system harvey (port tty01)
uucico harvey - (...) Login successful
uucico harvey - (...) Handshake successful (protocol 'i' sending packet/window  
1024/16 receiving 1024/16)
uucico harvey dave (...) Sending rmail dave@harvey.aball.de (D.000F) (13980 bytes)
uucico harvey root (...) Receiving rmail nexttoyou (1106 bytes)
uucico harvey news (...) Receiving rnews (34326 bytes resume at 4096)
uucico harvey - (...) ERROR: Too many 'i' protocol errors
uucico harvey - (...) Protocol 'i' packets: sent 22, resent 0, received 18
uucico harvey - (...) Errors: header 201, checksum 188, order 13, remote rejects 0
uucico harvey - (...) Call complete (28 seconds 7250 bytes 258 bps)


The modem is a external ISDN Device that is acessed with 115200 Baud.

The machine:

Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3_ALPHA (ALICE) #0: Thu Nov 27 05:26:49 CET 1997
    root@alice:/usr/src/sys/arch/i386/compile/ALICE
cpu0: family 4 model 8 step 0
cpu0: Intel 486DX4 (486-class)
real mem  = 41545728
avail mem = 37363712
using 532 buffers containing 2179072 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 2
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82424ZX Cache and DRAM controller (CDC) (rev. 0x04)
ncr0 at pci0 dev 1 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at irq 15
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <Quantum, XP32150W, L912> SCSI2 0/direct fixed
sd0: sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8)
2151MB, 3907 cyl, 10 head, 112 sec, 512 bytes/sect x 4406960 sectors
pcib0 at pci0 dev 2 function 0
pcib0: Intel 82378ZB System I/O (SIO) (rev. 0x84)
de0 at pci0 dev 5 function 0
de0: interrupting at irq 14
de0: Cogent 21040 [10Mb/s] pass 2.3
de0: address 00:00:92:90:75:17
S3 Trio32/64 (VGA display) at pci0 dev 6 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
com3 at isa0 port 0x2e8-0x2ef irq 9: ns8250 or ns16450, no fifo
npx0 at isa0 port 0xf0-0xff: using exception 16
pcprobe: reset error 1
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
biomask 8040 netmask c040 ttymask c042
boot device: sd0
root on sd0a dumps on sd0b
de0: enabling AUI/BNC port

WHAT CAN IT BE?

Please help.

   _  _
 _(_)(_)_  David Wetzel, Turbocat's Development,
(_) __ (_) Buchhorster Strasse, D-16567 Muehlenbeck/Berlin, FRG,
  _/  \_   Phone +49 33056 82834, Fax +49 33056 82835
 (______)  dave@turbocat.de (NeXTmail)  http://www.turbocat.de/