Subject: 1.3 Boot hangs until keypress during ifconfig of "de0"
To: None <current-users@NetBSD.ORG>
From: Brian Marcotte <marcotte@panix.com>
List: current-users
Date: 11/20/1997 17:07:57
A few of our machines have Kingston Ethernet PCI cards which probe as
"de0". Occasionally during the ifconfig, we get:

	de0: abnormal interrupt: receive process stopped

and it hangs at that point until I press return on the (serial)
console.

Any ideas?

--------------------

NetBSD 1.3_ALPHA (PANIX-STD) #0: Mon Nov 17 17:08:10 EST 1997
    marcotte@trinity.panix.com:/usr/src/sys/arch/i386/compile/PANIX-STD
cpu0: Cyrix 6x86 (486-class)
real mem  = 33161216
avail mem = 29376512
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439HX System Controller (TXC) (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
Intel 82371SB IDE Interface (PIIX3) (IDE mass storage, interface 0x80) at pci0 dev 7 function 1 not configured
de0 at pci0 dev 10 function 0
de0: interrupting at irq 12
de0: 21041 [10Mb/s] pass 2.1
de0: address 00:c0:f0:21:d8:e3
bha0 at pci0 dev 11 function 0: BusLogic 9xxC SCSI
bha0: interrupting at irq 11
bha0: model BT-948, firmware 5.05R
bha0: sync, parity
bha0 targ 0: sync, offset 15, period 100nsec
scsibus0 at bha0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, FIREBALL ST6.4S, 0F0C> SCSI2 0/direct fixed
sd0: 6236MB, 7068 cyl, 8 head, 225 sec, 512 bytes/sect x 12772516 sectors
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: console
lpt0 at isa0 port 0x378-0x37b irq 7
npx0 at isa0 port 0xf0-0xff: using exception 16
pcvt: doreset() - got KEYB_R_RESEND response ... [one time only msg]
pcvt: doreset() - Caution - no PC keyboard detected!
vt0 at isa0 port 0x60-0x6f irq 1
vt0: unknown trident, 80 col, color, 8 scr, unknown kbd, [R3.32]
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 840 netmask 1840 ttymask 18c2
de0: enabling 10baseT port
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
de0: abnormal interrupt: receive process stopped