>Date: Tue, 18 Nov 1997 08:12:37 +0200
>From: Jukka Marin <jmarin@pyy.jmp.fi>
>
>On Mon, Nov 17, 1997 at 07:45:05PM -0500, Mike Long wrote:
>
>> >>isapnp0 at isa0 port 0x279: read port 0x203
>> >>isapnp0: Resource timeout, card 1
>
>> If it's getting resource data from a serial EEPROM it might take a bit
>> longer than that.  Worst case for one PnP part I did was 624
>> microseconds for the first byte out of a two-wire serial EEPROM (later
>> bytes took 336 us each).  DELAY(1000) should do the trick.
>
>DELAY(1000) did not help.  DELAY(1000) with the loop limit set to 200
>did help:

That's 200 *milliseconds* it's making you wait.  I'd say this card has
some serious problems.

>isapnp0 at isa0 port 0x279: read port 0x203
>isapnp0: <ALS100 Media Audio Controller, @@@0001, , > port 0x220/16 irq 5 drq 5,1 not configured
>isapnp0: <ALS100 Media Audio Controller, @H@0001, , > port 0x388/8 not configured
>isapnp0: <ALS100 Media Audio Controller, @P@0001, , > port 0x200/2 not configured
>isapnp0: <ALS100 Media Audio Controller, @X@0001, , > port 0x330/2 irq 9 not configured

-- 
Mike Long <mikel@shore.net>                http://www.shore.net/~mikel
"Every normal man must be tempted at times to spit on his hands,
hoist the black flag, and begin slitting throats." -- H.L. Mencken