So that you people can see what the scoop is, here are the
boot messages from booting the kernel the cgd just built.


Things to note, things that are broken:

1) It's having problem making isp1's registers. Don't know why yet.

2) It doesn't do PCI bridges correctly, so while it'll see bridge chips,
it won't go past them right now.

3) 'unclaimed' interrupts: Due to the way things seem to be done in
the h/w, there'll be occasional ones of these.

(The first two are high priority issues for me to fix the week after
next...)

High praise to Chris and the NetBSD folks in general for such a clean
base to port things in.

-matt


---------------------------------------------------------------------------
Entering netbsd at 0xfffffc0000300000...
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.2C (GENERIC) #31: Thu Mar 13 00:10:39 EST 1997
    cgd@bunnahabhain.pdl.cs.cmu.edu:/usr/src/sys/arch/alpha/compile/GENERIC
AlphaServer 8400, 300MHz
8192 byte page size, 1 processor.
real mem = 134217728 (2367488 reserved for PROM, 131850240 used by NetBSD)
avail mem = 111214592
using 1609 buffers containing 13180928 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 8 (primary), 21164 (pass 4)
cpu0: VAX FP support, IEEE FP support, Primary Eligible
tlsb0 at mainbus0
tlsb0 node 4: Single CPU, 4MB cache, VID 8 -> cpu
gbus0 at tlsb0 node 4: Single CPU, 4MB cache
mcclock0 at gbus0: mc146818 or compatible
tlsbmem0 at tlsb0 node 5: MS7CC Memory Module
kft0 at tlsb0 node 8: KFTIA I/O interface
dwlpx0 at kft0, hose 0
pci0 at dwlpx0 bus 0
isp0 at pci0 dev 0 function 0
isp0: F/W Revision 2.10
isp0: interrupting at kn8ae irq 14 vector 0x8400 PCI Interrupt Pin A
scsibus0 at isp0: 16 targets
isp1 at pci0 dev 1 function 0: unable to map registers
de0 at pci0 dev 2 function 0: DC21040 [10Mb/s] pass 2.3
de0: Ethernet address 08:00:2b:e6:21:00
de0: enabling 10baseT/UTP port
de0: interrupting at kn8ae irq 14 vector 0x8402 PCI Interrupt Pin A
isp2 at pci0 dev 4 function 0
isp2: F/W Revision 2.10
isp2: interrupting at kn8ae irq 14 vector 0x8404 PCI Interrupt Pin A
scsibus1 at isp2: 16 targets
isp3 at pci0 dev 5 function 0
isp3: F/W Revision 2.10
isp3: interrupting at kn8ae irq 14 vector 0x8405 PCI Interrupt Pin A
scsibus2 at isp3: 16 targets
sd0 at scsibus2 targ 0 lun 0: <DEC, RZ28     (C) DEC, D41C> SCSI2 0/direct fixed
sd0: 2007MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sec
sd1 at scsibus2 targ 1 lun 0: <DEC, RZ28     (C) DEC, D41C> SCSI2 0/direct fixed
sd1: 2007MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sec
sd2 at scsibus2 targ 3 lun 0: <DEC, RZ28M    (C) DEC, 0466> SCSI2 0/direct fixed
sd2: 2007MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sec
cd0 at scsibus2 targ 4 lun 0: <DEC, RRD43   (C) DEC, 1084> SCSI2 5/cdrom removable
sd3 at scsibus2 targ 5 lun 0: <DEC, RZ28     (C) DEC, 442D> SCSI2 0/direct fixed
sd3: 2007MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sec
de1 at pci0 dev 6 function 0: DC21040 [10Mb/s] pass 2.3
de1: Ethernet address 08:00:2b:e6:1f:5f
de1: enabling Thinwire/AUI port
de1: interrupting at kn8ae irq 14 vector 0x8406 PCI Interrupt Pin A
dwlpx1 at kft0, hose 1
pci1 at dwlpx1 bus 0
fpa0 at pci1 dev 0 function 0fpa0: interrupting at kn8ae irq 14 vector 0x8410 PCI Interrupt Pin A
ppb0 at pci1 dev 1 function 0: Digital Equipment DECchip 21050 PCI-PCI Bridge (rev. 0x02)
pci2 at ppb0 bus 2
kn8ae_iointr: TLSB Node 8 Hose 0 Slot 0 -  unclaimed interrupt
kn8ae_iointr: TLSB Node 8 Hose 0 Slot 4 -  unclaimed interrupt
kn8ae_iointr: TLSB Node 8 Hose 0 Slot 0 -  unclaimed interrupt
kn8ae_iointr: TLSB Node 8 Hose 0 Slot 5 -  unclaimed interrupt
root on sd3a swap on sd3b
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
Automatic boot in progress: starting file system checks.
/dev/rsd3a: file system is clean; not checking
/dev/rsd3d: file system is clean; not checking
/dev/rsd1c: file system is clean; not checking
/dev/rsd3e: file system is clean; not checking
/dev/rsd2c: file system is clean; not checking
setting tty flags
starting network
kn8ae_iointr: TLSB Node 8 Hose 0 Slot 2 -  unclaimed interrupt
add host mother.nas.nasa.gov: gateway localhost
starting system logger
starting rpc daemons: portmap mountd nfsd nfsiod.
checking for core dump...
savecore: no core dump
checking quotas: done.
building databases...
clearing /tmp
standard daemons: update cron.
starting network daemons: routed printer inetd.
starting local daemons: SSHD.
Wed Mar 12 22:12:35 PST 1997
Mar 12 22:12:36 mother init: kernel security level changed from 0 to 1

NetBSD/alpha (mother.nas.nasa.gov) (console)

login: