Hello!

I have problems with the sbic changes that came with current 24.11.95.
Using loadbsd 2.12 and the new kernal I end up in:

ahsc0: Inhibiting synchronous transfer 01
scsibus0 at ahsc0
ahsc0 targ 0 lun 0: <QUANTUM, LPS540S, 5900> SCSI2 0/direct fixed
sd0 at scsibus0: 516MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sec
ahsc0: target 1 now synchronous, period=248ns, offset=8.
ahsc0 targ 1 lun 0: <QUANTUM, LP105S 910109405, 3.1> SCSI2 0/direct fixed
sd1 at scsibus0: 100MB, 1219 cyl, 4 head, 42 sec, 512 bytes/sec
ahsc0: target 3 now synchronous, period=208ns, offset=8.
ahsc0 targ 3 lun 0: <QUANTUM, LIGHTNING 730S, 241E> SCSI2 0/direct fixed
sd2 at scsibus0: 699MB, 3658 cyl, 4 head, 97 sec, 512 bytes/sec
ahsc0: target 6 now synchronous, period=208ns, offset=12.
ahsc0 targ 6 lun 0: <CONNER, CFP1080S, 4649> SCSI2 0/direct fixed
sd3 at scsibus0: 1030MB, 3658 cyl, 6 head, 96 sec, 512 bytes/sec
2 mice configured
10 views configured
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
/dev/sd2a: file system not clean; please fsck(8)
ahsc0: dma timeout #1
sbicintr: asr:csr(20:18)->(21:ff)
ahsc0: dma timeout #2
sbicintr: asr:csr(20:18)->(21:ff)
ahsc0: dma timeout #3
sbicintr: asr:csr(20:18)->(21:ff)
ahsc0: dma timeout #4
sbicintr: asr:csr(20:18)->(21:ff)
ahsc0: dma timeout #5
sbicintr: asr:csr(20:18)->(21:ff)
ahsc0: dma timeout #6
sbicintr: asr:csr(20:18)->(21:ff)
ahsc0: dma timeout #7
sbicintr: asr:csr(20:18)->(21:ff)
ahsc0: dma timeout #8
sbicintr: asr:csr(20:18)->(21:ff)

(that was booting with `loadbsd -a -I inhibit_sync netbsd - without setting
 inhibit_sync I end up with the system hanging at "scsibus0 at ahsc0")

Anyone know how to fix that?

Thanx for any help in advanve.

Greets
      Thorsten