> I've had a similar problem here...  i'm not so sure that the 'is'
> driver should be in the GENERIC kernels, as is...

I removed the SMC card in the meantime (it won't work even with hardwired
setup anymore) and still get this:

NetBSD 0.9a (GENERICAHA) #9: Sat Apr 16 23:13:55 PDT 1994
  cgd@sun-lamp.cs.berkeley.edu:/usr/src/sys/arch/i386/compile/GENERICAHA
CPU: i486DX (486-class CPU)
real mem  = 16384000
avail mem = 14426112
using 225 buffers containing 921600 bytes of memory
pc0 at isa0 port 0x60-0x6f irq 1: color
com0 at isa0 port 0x3f8-0x3ff irq 4: ns82450 or ns16450, no fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt1 at isa0 port 0x378-0x37f: polled
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
ahb0 at isa0 port 0x1000-0x1fff irq 11: model 1740 or 1742, revision 2
scsibus1 at ahb0
ahb0 targ 0 lun 0: <QUANTUM LPS525S         3100> SCSI2 direct fixed
sd0 at scsibus1: 501MB, 2448 cyl, 6 head, 69 sec, 512 bytes/sec
ahb0 targ 3 lun 0: <CALIPER CP150           1.17> SCSI1 sequential removable
st0 at scsibus1: drive empty
ie0: unknown AT&T board type code 0
ie0: can't map 3C507 RAM in high memory
npx0 at isa0 port 0xf0-0xff: using exception 16
biomask 840 netmask 0 ttymask 1a
stray interrupt 4
stray interrupt 11
changing root device to sd0a
stray interrupt 3
stray interrupt 3

I hope the ie driver doesn't fidle with my hardware to do some *bad 
things* (TM), I already lost my ethernet controller...

But the thing I'm realy worried about is: why doesn't my self-compiled
kernel work? It dies in fsck...


Martin

------------------------------------------------------------------------------