Hei!

I currently experience problems with my ed0 after 
repairing my Trident 8900C Card.  The VGA used to have
256 K, because one chip in the second memory bank broke down.
From the time I fixed it the ed0 in my box began to 
generate log messages; is it possible that some addresses
are conflicting?  I cannot see that, but it may be possible...

All upgraded with Mar 19 tar_files

Here my setup and the messages:

NetBSD 0.9a (ZAPPA) #6: Tue Mar 22 18:39:38 MET 1994
  root@zappa.Ruhr.DE:/usr/src/sys/arch/i386/compile/ZAPPA
CPU: i386DX (386-class CPU)
real mem  = 7995392
avail mem = 6209536
using 123 buffers containing 503808 bytes of memory
sc0 at 0x60-0x6f irq 1 on isa
sc0: VGA color <12 virtual consoles>
npx0 at 0xf0-0xff irq 13 on isa
com0 at 0x3f8-0x3ff irq 4 on isa
com0: ns16550a, working fifo
com1 at 0x2f8-0x2ff irq 3 on isa
com1: ns16550a, working fifo
com2 at 0x3e8-0x3ef irq 5 on isa
com2: ns82450 or ns16450, no fifo
lpt0 at 0x378-0x37f irq 7 on isa
wdc0: ignore this: busy-wait took 1896900us
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: ignore this: busy-wait took 24900us
wd0 at wdc0 targ 0: 100MB 732 cyl, 8 head, 35 sec <ALPS ELECTRIC Co.,LTD. DR311C>
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0 at fdc0 targ 0: 1.44MB 80 cyl, 2 head, 18 sec
aha0 at 0x330-0x337 irq 11 drq 5 on isa
aha0: bus speed 250ns
aha0 targ 0 lun 0: type 0(direct) fixed <QUANTUM LP105S 9101094052.6E> SCSI2
sd0 at aha0 targ 0 lun 0: 99MB 1219 cyl, 4 head, 42 sec, 512 byte/sec
aha0 targ 1 lun 0: type 0(direct) fixed <FUJITSU M2624S-512      0202> SCSI2
sd1 at aha0 targ 1 lun 0: 491MB 1429 cyl, 11 head, 64 sec, 512 byte/sec
aha0 targ 2 lun 0: type 0(direct) fixed <DEC     RZ23     (C) DEC0A18> SCSI1
sd2 at aha0 targ 2 lun 0: 100MB 776 cyl, 8 head, 33 sec, 512 byte/sec
aha0 targ 4 lun 0: type 1(seq) removable <ARCHIVE VIPER 150  21247-005> SCSI1
st0 at aha0 targ 4 lun 0: 0 blocks of 512 bytes
ed0 at 0x280-0x29f irq 9 maddr 0xd0000-0xd3fff on isa
ed0: address 00:00:c0:0c:b4:24, type WD8013EP (16-bit)
sb: couldn't reset card
biomask 4840 ttymask ba netmask 200
wdc0: extra interrupt
ed0: device timeout
ed0: device timeout
ed0: device timeout
ed0: device timeout
ed0: device timeout


Any help appreciated.

	Oskar

------------------------------------------------------------------------------