On Sun, Nov 23, 2003 at 06:06:15PM +0100, Vladimir Kotal wrote:

> Secondary cache size: 512 Kbytes

Okay, so there is a SC ...

> cpu0 at mainbus0: MIPS R5000 CPU (0x2310) Rev. 1.0 with built-in FPU Rev. 1.0
> cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
> cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
> cpu0: 512KB/32B direct-mapped write-back L2 Data cache
> cpu0: disabling IP22 SysAD L2 cache

1.6.1 sees it because it asks ARCS ...

> cpu0 at mainbus0: MIPS R5000 CPU (0x2310) Rev. 1.0 with built-in FPU Rev. 1.0
> cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
> cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
> imc0 at mainbus0 addr 0x1fa00000

-current doesn't because apparently your ARCS clears either the SC or SE
bit in cop0.

I'm going to send a test kernel to you tomorrow that, with luck, will let us
know exactly what's going on here.  Your install failure was most likely a
L2 cache botch.

-- Chris
	GPG key FEB9DE7F (91AF 4534 4529 4BCC 31A5  938E 023E EEFB FEB9 DE7F)