Paul Apprich wrote:
>     I had recently installed NetBSD 1.6 on one IBM PS/2 9595-0PT. The
> trouble is with the ethernet adapter 'we2'. How should the resources be
> set so as to fix the 'shared memory' problem?

Perhaps the driver computes the I/O space address incorrectly.
 
>     I had set a BusLogic MCA SCSI adaptor to resources normally used by
> Adaptec (i/o=0x330-0x333 irq=15 dma=7). It works like the AHA-1640. No
> trouble reported so far.

Hmm, aha@mca might be changed to match it (with low priority), and
bha@mca attachment shouldn't be too hard to write neither.

Would you be able to eventually try test bootfloppies if I'd prepare floppy
images with some test code?
 
Jaromir

> NetBSD 1.6 (GENERIC) #0: Sun Sep  8 19:43:40 UTC 2002
> 
> autobuild@tgm.daemon.org:/autobuild/i386/OBJ/autobuild/src/sys/arch/i386/compile/GENERIC
> 
> cpu0: Intel Pentium (P5) (586-class), 60.01 MHz
> cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> total memory = 65148 KB
> avail memory = 53956 KB
> using 839 buffers containing 3356 KB of memory
> mainbus0 (root)
> mca0 at mainbus0
> mca0 slot 1: IBM Fast SCSI-2 Adapter (0x8efc) not configured
> mca0 slot 3: BusTek BT-640A SCSI Host Adapter (0x0708) not configured
> mca0 slot 5: IBM XGA/XGA-2 Display Adapter (0x8fda) not configured
> we2 at mca0 slot 7 irq 3: EtherCard PLUS Elite 10T/A (8013WP/A)
> we2: can't map shared memory
> isa0 at mainbus0
> aha0 at isa0 port 0x330-0x333 irq 15 drq
> aha0: model AHA-1640, firmware 3.3
> aha0: sync, no parity
> aha0 targ 0: sync, offset 8, period 200nsec
> aha0 targ 1: sync, offset 8, period 200nsec
> aha0 targ 3: sync, offset 15, period 250nsec
> scsibus0 at aha0: 8 targets, 8 luns per target
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using
> wskbd0
> wsmux1: connecting to wsdisplay0
> lpt0 at isa0 port 0x378-0x37b irq 7
> lpt2 at isa0 port 0x3bc-0x3bf irq : polled
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: PC speaker
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> WARNING: Pentium FDIV bug detected!
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> isapnp0: no ISA Plug 'n Play devices found
> biomask ef65 netmask ef65 ttymask ffe7
> scsibus0: waiting 2 seconds for devices to settle...
> sd0 at scsibus0 target 0 lun 0: <CORE, 1.0GB, 9028> SCSI2 0/direct fixed
> 
> sd0: 955 MB, 1921 cyl, 16 head, 63 sec, 512 bytes/sect x 1956864 sectors
> 
> sd1 at scsibus0 target 1 lun 0: <CORE, 1.0GB, 9028> SCSI2 0/direct fixed
> 
> sd1: 955 MB, 1921 cyl, 16 head, 63 sec, 512 bytes/sect x 1956864 sectors
> 
> cd0 at scsibus0 target 3 lun 0: <TOSHIBA, CD-ROM XM-4101TA, 2893> SCSI2
> 5/cdrom removable
> Kernelized RAIDframe activated
> sd0: no disk label
> sd0: no disk label
> boot device: sd1
> root on sd1a dumps on sd1b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> sd0: no disk label
> 
> TiA
> 
> Paul
> 


-- 
Jaromir Dolecek <jdolecek@NetBSD.org>            http://www.NetBSD.org/
-=- We should be mindful of the potential goal, but as the tantric    -=-
-=- Buddhist masters say, ``You may notice during meditation that you -=-
-=- sometimes levitate or glow.   Do not let this distract you.''     -=-