We have two Cogent EM110 21140 based cards, neither of which seem
	to want to work in a PC here. I borrowed a friend's Netgear card
	(A much cheaper card) which configures and works fine.

	Would the de driver from -current help here? We'd like to
	use this box for packet filtering in a production environment,
	so we'd much rather stick with 1.3.1 if we can...

	They worked find under NeXTStep at 10baseT, but under NetBSD
	the 100BaseT light locks on. For the install we need to use
	10baseT - I'll check it against a 100baseT port when I get
	a chance later.

	Non functional Cogent cards configure with:

de0 at pci0 dev 15 function 0
de0: interrupting at irq 11
de0: Cogent 21140 [10-100Mb/s] pass 1.1
de0: address 00:00:92:96:04:36
de0: enabling 10baseT port

de1 at pci0 dev 16 function 0
de1: interrupting at irq 9
de1: Cogent 21140A [10-100Mb/s] pass 2.0
de1: address 00:00:92:96:39:cb
de1: enabling 10baseT port

	Happy Netgear card:

de0 at pci0 dev 16 function 0
de0: interrupting at irq 9
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:a0:4e:3d

kern/msgbuf from 1.3.1 INSTALL floppy:

Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3.1 (INSTALL) #0: Wed Apr  8 01:20:41 EDT 1998
    perry@frankenstein.piermont.com:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 5 model 2 step b
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 133820416
avail mem = 128475136
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x122d (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x122e (rev. 0x02)
ahc1 at pci0 dev 13 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc1 channel 0: 16 targets
ahc1: target 0 synchronous at 10.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <MICROP, 3243-19MZ  Q4D, HT02> SCSI2
0/direct fixed
sd0: 4095MB, 3956 cyl, 19 head, 111 sec, 512 bytes/sect x 8388315 sectors
vendor 0x105d product 0x2309 (VGA display) at pci0 dev 14 function 0 not
configured
de0 at pci0 dev 15 function 0
de0: interrupting at irq 11
de0: Cogent 21140 [10-100Mb/s] pass 1.1
de0: address 00:00:92:96:04:36
de0: enabling 10baseT port
de1 at pci0 dev 16 function 0
de1: interrupting at irq 9
de1: Cogent 21140A [10-100Mb/s] pass 2.0
de1: address 00:00:92:96:39:cb
de1: enabling 10baseT port
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 840 netmask a40 ttymask a42
md0: internal 1537K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs


		David/absolute

           -=-  Give me one last video, just dressed in black  -=-