I have recently installed Thor's snapshot 1.1 Alpha on a P90, 16MB RAM, 
NE2000-clone ISA ethernet card.  We 'migrated' from a 1.0->July current
kernel.  

Kernel label:

NetBSD 1.1_ALPHA (INSTOTHER) #0: Fri Oct 27 22:07:27 PDT 1995
    tls@alligator.tjls.com:/usr/src/sys/arch/i386/compile/INSTOTHER

There have been a couple of disturbing messages from the kernel.  Namely:

wd0: wdcintr: read intr before drq: status 0 error 0

and

ed0: length does not match next packet pointer
ed0: len 00fc nlen 01fc start 4c first 54 curr 56 next 56 stop 80

This driver 'debug' message has come up a few times.  Is it hardware related?

Attached is the output of dmesg.

Cheers
Tim.



NetBSD 1.1_ALPHA (INSTOTHER) #0: Fri Oct 27 22:07:27 PDT 1995
    tls@alligator.tjls.com:/usr/src/sys/arch/i386/compile/INSTOTHER
CPU: Pentium (GenuineIntel 586-class CPU)
real mem  = 16384000
avail mem = 14266368
using 225 buffers containing 921600 bytes of memory
isa0 (root)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37f irq 7
sea0: board type unknown at address 0xf81e6000
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 drive 0: 814MB, 1654 cyl, 16 head, 63 sec, 512 bytes/sec <Maxtor 7850 AV>
wd0: using 8-sector 16-bit pio transfers, lba addressing
wd1 at wdc0 drive 1: 814MB, 1654 cyl, 16 head, 63 sec, 512 bytes/sec <WDC AC2850F>
wd1: using 16-sector 16-bit pio transfers, lba addressing
ed0 at isa0 port 0x280-0x29f irq 9: address 00:40:33:33:ce:c5, type NE2000 (16-bit)
ie0: unknown AT&T board type code 15
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
root device eisa not configured
pci0 (root): configuration mode 1
pci0 bus 0 device 0: unknown vendor/product: 0x8086/0x122d (class: bridge, subclass: host, revision: 0x01) not configured
pci0 bus 0 device 7: unknown vendor/product: 0x8086/0x122e (class: bridge, subclass: ISA, revision: 0x02) not configured
pci0 bus 0 device 19: unknown vendor/product: 0x1023/0x9440 (class: display, subclass: VGA, revision: 0xe3) not configured
biomask 4040 netmask 200 ttymask 1a
changing root device to wd0a
wd0: wdcintr: read intr before drq: status 0 error 0
lpt0: out of paper
ed0: length does not match next packet pointer
ed0: len 00fc nlen 01fc start 4c first 54 curr 56 next 56 stop 80