Hi !

Hopefully somebody can sched some light on a problem
I encountered after I put an aha1542cf SCSI card in
my NetBSD-i486 box.
NetBSD1.0-release refused to work with the aha and
an attached Quantum disk (it crashed shortly after
detecting the harddisk), NetBSD-current boots into
multi-user but if I try to acces the SCSI disk,
I get timeout-mesages all the time.
The IDE disk still works fine, though.
I appended the dmesg output, maybe someone can tell me,
what this timedoutaha message means ?

   thanks

    Jochen

NetBSD 1.0A (JOCHEN) #0: Thu Jan 26 07:11:05 PST 1995
    mycroft@sun-lamp.cs.berkeley.edu:/d/users/mycroft/src/sys/arch/i386/compile/JOCHEN
CPU: i486DX (GenuineIntel 486-class CPU)
real mem  = 7995392
avail mem = 6336512
using 123 buffers containing 503808 bytes of memory
isa0 (root)
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37f irq 7
aha0: 1542C/CF detected, unlocking mailbox
aha0 at isa0 port 0x330-0x333 irq 11 drq 5
scsibus0 at aha0
aha0 targ 2 lun 0: <QUANTUM, LPS340S, 020B> SCSI2 0/direct fixed
sd0 at scsibus0: 327MB, 2337 cyl, 4 head, 71 sec, 512 bytes/sec
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mcd0: timeout in getresult
mcd0: timeout in getresult
mcd0: timeout in getresult
mcd0: timeout in getresult
mcd0: timeout in getresult
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 drive 0: 408MB, 899 cyl, 15 head, 62 sec, 512 bytes/sec <ST3491A>
wd0: using 16-sector 16-bit pio transfers, chs addressing
ie0: unknown AT&T board type code 15
sb: couldn't reset card
root device eisa not configured
pci0 (root): configuration mode 1
pci0 bus 0 device 14: identifier 88c15333 class 00010000 not configured
pci0 bus 0 device 15: identifier 06401095 class 01010a02 not configured
pci0 bus 0 device 16: identifier 88811060 class 06000001 not configured
pci0 bus 0 device 18: identifier 88861060 class 06010001 not configured
biomask 4840 netmask 1a ttymask 1a
changing root device to wd0a
/dev/wd0a: file system not clean; please fsck(8)
/dev/wd0e: file system not clean; please fsck(8)

 Aperture driver for XFree86 version 1.1
sd0(aha0:2:0): timed outaha0: not taking commands!

sd0(aha0:2:0): timed outaha0: not taking commands!
 AGAIN
sd0(aha0:2:0): timed outaha0: not taking commands!

sd0(aha0:2:0): timed outaha0: not taking commands!
 AGAIN