Port-amiga archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Automatically setting CMACHFLAGS -m680x0



        I've taken another pass at setting CMACHFLAGS based on the
        values of -DM68020, -DM68030, -DM68040, and -DM68060, plus
        making it sharable between m68k ports.

        It consists of a sys/arch/m68k/Makefile.cmachflags which
        can be included by a given port's Makefile.${foo} (patch
        for atari and amiga included).

        Obviously this only makes sense for ports which have kernel
        configs that target multiple CPU types (so that excludes
        sun3 :)

        The idea is Makefile.cmachflags is included IFF the config
        file has not set CMACHFLAGS, allowing people to easily
        override it.

        It doesn't deal with adding -Wa,-m68030 or similar - that
        should be decided by the port.

        What do people think?

        As an aside atari includes '-Wa,-m68030' in CMACHFLAGS
        while amiga uses '-Wa,-m68030 -Wa,-m68851' - is there a
        significance to the difference?
#       $NetBSD$

# Set CMACHFLAGS best target the specific CPU combination, based on
# -DM68020, -DM68030, -DM68040, and -DM68060

# This should typically be included iff the config file has not already set
# CMACHFLAGS, eg:
#   .if !defined(CMACHFLAGS)
#   .include "$S/arch/m68k/Makefile.cmachflags"
#   CMACHFLAGS+=    -Wa,-m68030 -Wa,-m68851
#   .endif

# Table of CPUs targetted vs gcc flags. Note: -m68020 and -m68030 are
# ~identical, but they are both included for completeness.

# 020 030 040 060 -m68020-60
# 030 040 060     -m68020-60
# 020 040 060     -m68020-60
# 020 030 060     -m68020-60
# 040 060         -m68020-60 (Would have been nice to have a -m68040-60)
# 030 060         -m68020-60
# 020 060         -m68020-60
# 060             -m68060
#
# 020 030 040     -m68020-40
# 030 040         -m68020-40
# 020 040         -m68020-40
# 040             -m68040
#
# 020 030         -m68020
# 030             -m68030
# 020             -m68020

.if !empty(IDENT:M-DM68060)
.if empty(IDENT:M-DM68020) && empty(IDENT:M-DM68030) && empty(IDENT:M-DM68040)
CMACHFLAGS=     -m68060
.else
CMACHFLAGS=     -m68020-60
.endif
.elif !empty(IDENT:M-DM68040)
.if empty(IDENT:M-DM68020) && empty(IDENT:M-DM68030)
CMACHFLAGS=     -m68040
.else /* !-DM68060 */
CMACHFLAGS=     -m68020-40
.endif
.elif !empty(IDENT:M-DM68020)
CMACHFLAGS=     -m68020
.else
CMACHFLAGS=     -m68030
.endif /* !-DM68060 */
Index: sys/arch/atari/conf/Makefile.atari
===================================================================
RCS file: /cvsroot/src/sys/arch/atari/conf/Makefile.atari,v
retrieving revision 1.72
diff -u -r1.72 Makefile.atari
--- sys/arch/atari/conf/Makefile.atari  25 Jan 2008 20:02:06 -0000      1.72
+++ sys/arch/atari/conf/Makefile.atari  24 Jan 2009 14:27:42 -0000
@@ -27,10 +27,9 @@
 ## (2) compile settings
 ##
 CPPFLAGS+=     -Datari
-.if empty(IDENT:M-DM68060)
-CMACHFLAGS=    -m68020
-.else
-CMACHFLAGS=    -m68060 -Wa,-m68030
+.if !defined(CMACHFLAGS)
+.include "$S/arch/m68k/Makefile.cmachflags"
+CMACHFLAGS+= -Wa,-m68030
 .endif
 CFLAGS+=       ${CMACHFLAGS} -msoft-float
 AFLAGS+=       -x assembler-with-cpp -traditional-cpp
Index: sys/arch/amiga/conf/Makefile.amiga
===================================================================
RCS file: /cvsroot/src/sys/arch/amiga/conf/Makefile.amiga,v
retrieving revision 1.105
diff -u -r1.105 Makefile.amiga
--- sys/arch/amiga/conf/Makefile.amiga  25 Jan 2008 19:39:22 -0000      1.105
+++ sys/arch/amiga/conf/Makefile.amiga  24 Jan 2009 14:27:42 -0000
@@ -32,10 +32,9 @@
 ## (2) compile settings
 ##
 CPPFLAGS+=     -Damiga -DFPCOPROC
-.if empty(IDENT:M-DM68060)
-CMACHFLAGS=    -m68020
-.else
-CMACHFLAGS=    -m68060 -Wa,-m68030 -Wa,-m68851
+.if !defined(CMACHFLAGS)
+.include "$S/arch/m68k/Makefile.cmachflags"
+CMACHFLAGS+=   -Wa,-m68030 -Wa,-m68851
 .endif
 CFLAGS+=       ${CMACHFLAGS} -msoft-float
 AFLAGS+=       -x assembler-with-cpp -traditional-cpp


Home | Main Index | Thread Index | Old Index