Re: ipv4_prefer

[mlh%goathill.org@localhost (MLH)]

Jonathan A. Kollasch wrote:
> On Mon, Apr 29, 2024 at 02:16:13PM -0400, MLH wrote:
> > ifconfig :
> > re0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> >         capabilities=0x3f80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx>
> >         capabilities=0x3f80<UDP4CSUM_Rx,UDP4CSUM_Tx>
> >         enabled=0
> >         ec_capabilities=0x3<VLAN_MTU,VLAN_HWTAGGING>
> >         ec_enabled=0
> >         address: (xx:xx:xx:xx:xx:xx)
> >         media: Ethernet autoselect (1000baseT full-duplex)
> >         status: active
> >         inet6 (fe80::xxxx:xxxx:xxxx:xx%re0/64) flags 0 scopeid 0x1
> >         inet6 ::1000/128 flags 0
> 
> Has "::1000/128" been redacted?  Because it looks bogus if it isn't.

No. I didn't change that.

I am using dhcpcd and maybe that isn't getting set up correctly
but --inform6 just returns with "sending commands to dhcpcd
process/send OK" and nothing else.  I will try '--waitip=6' to
dhcpcd commands and see what happens there.

The router is set up for dhcpv6 and appears to be working.

Thanks