NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: kern/58232



The following reply was made to PR kern/58232; it has been noted by GNATS.

From: Ramiro Aceves <ea1abz%gmail.com@localhost>
To: NetBSD bugtracking <gnats-bugs%netbsd.org@localhost>
Cc: 
Subject: Re: kern/58232
Date: Thu, 9 May 2024 14:21:31 +0200

 Hello,
 
 I have experienced same behaviour in my Compal Electronics DL75 old i386 laptop.
 
 Compiled kernel with IWI_DEBUG option
 
 $ cat dmesg-compal-last.txt|grep error|grep iwi
 [  2031.549774] iwi0: autoconfiguration error: fatal error
 
 
 Network stopped when downloading a iso file from cdn.netbsd.org at
 that moment. I could recover it setting up the interface and service
 network restart.
 
 
 
 Full session dmesg:
 
 
 [   530.254162] atabus0: detached
 [   530.264165] rebooting...
 [     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 [     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
 [     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
 [     1.000000]     2024
 [     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
 [     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [     1.000000]     The Regents of the University of California.  All
 rights reserved.
 
 [     1.000000] NetBSD 10.0 (MYKERNEL) #8: Tue May  7 21:51:06 CEST 2024
 [     1.000000]
 root@netbsd-compal.remigio:/usr/src/sys/arch/i386/compile/MYKERNEL
 [     1.000000] total memory = 2039 MB
 [     1.000000] avail memory = 1979 MB
 [     1.000000] timecounter: Timecounters tick every 10.000 msec
 [     1.000000] Kernelized RAIDframe activated
 [     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
 quality 100
 [     1.000004] mainbus0 (root)
 [     1.000004] cpu0 at mainbus0
 [     1.000004] ACPI Error: AE_BAD_PARAMETER, Thread 3242928192 could
 not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326)
 [     1.000004] cpu0: Use lfence to serialize rdtsc
 [     1.000004] cpu0: Intel(R) Pentium(R) M processor 1.86GHz, id 0x6d8
 [     1.000004] cpu0: node 0, package 0, core 0, smt 0
 [     1.000004] pci0 at mainbus0 bus 0: configuration mode 1
 [     1.000004] pci0: i/o space, memory space enabled, rd/line,
 rd/mult, wr/inv ok
 [     1.000004] pchb0 at pci0 dev 0 function 0: Intel
 82915PM/GM/GMS,82910GML Host Bridge (rev. 0x04)
 [     1.000004] agp0 at pchb0: i915-family chipset
 [     1.000004] agp0: detected 7932k stolen memory
 [     1.000004] agp0: aperture at 0xa0000000, size 0x10000000
 [     1.000004] i915drmkms0 at pci0 dev 2 function 0: Intel
 82915GM/GMS,82910GML Integrated Graphics Device (rev. 0x04)
 [     1.000004] Intel 82915GM/GMS IGD Companion (miscellaneous
 display, revision 0x04) at pci0 dev 2 function 1 not configured
 [     1.000004] uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB
 UHCI Controller (rev. 0x04)
 [     1.000004] uhci0: interrupting at irq 7
 [     1.000004] usb0 at uhci0: USB revision 1.0
 [     1.000004] uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB
 UHCI Controller (rev. 0x04)
 [     1.000004] uhci1: interrupting at irq 3
 [     1.000004] usb1 at uhci1: USB revision 1.0
 [     1.000004] uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB
 UHCI Controller (rev. 0x04)
 [     1.000004] uhci2: interrupting at irq 11
 [     1.000004] usb2 at uhci2: USB revision 1.0
 [     1.000004] uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB
 UHCI Controller (rev. 0x04)
 [     1.000004] uhci3: interrupting at irq 11
 [     1.000004] usb3 at uhci3: USB revision 1.0
 [     1.000004] ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB
 EHCI Controller (rev. 0x04)
 [     1.000004] ehci0: 64-bit DMA - limited
 [     1.000004] ehci0: interrupting at irq 7
 [     1.000004] ehci0: EHCI version 1.0
 [     1.000004] ehci0: 4 companion controllers, 2 ports each: uhci0
 uhci1 uhci2 uhci3
 [     1.000004] ehci0: Using DMA subregion for control data structures
 [     1.000004] usb4 at ehci0: USB revision 2.0
 [     1.000004] ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI
 Bridge (rev. 0xd4)
 [     1.000004] pci1 at ppb0 bus 1
 [     1.000004] pci1: i/o space, memory space enabled
 [     1.000004] fwohci0 at pci1 dev 0 function 0: VIA Technologies
 VT6306 IEEE 1394 Host Controller (rev. 0x80)
 [     1.000004] fwohci0: interrupting at irq 10
 [     1.000004] fwohci0: OHCI version 1.0 (ROM=1)
 [     1.000004] fwohci0: No. of Isochronous channels is 4.
 [     1.000004] fwohci0: EUI64 00:02:3f:59:88:40:01:0f
 [     1.000004] fwohci0: Phy 1394a available S400, 2 ports.
 [     1.000004] fwohci0: Link S400, max_rec 512 bytes.
 [     1.000004] fwohci0: max_rec 512 -> 2048
 [     1.000004] ieee1394if0 at fwohci0: IEEE1394 bus
 [     1.000004] fwip0 at ieee1394if0: IP over IEEE1394
 [     1.000004] fwohci0: Initiate bus reset
 [     1.000004] re0 at pci1 dev 1 function 0: RealTek 8169/8110
 Gigabit Ethernet (rev. 0x10)
 [     1.000004] re0: interrupting at irq 11
 [     1.000004] re0: RTL8169/8110SB (0x1000)
 [     1.000004] re0: Ethernet address 00:0f:b0:93:6f:e1
 [     1.000004] re0: using 256 tx descriptors
 [     1.000004] rgephy0 at re0 phy 7: RTL8211B 1000BASE-T media interface
 [     1.000004] rgephy0: 10baseT, 10baseT-FDX, 100baseTX,
 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 [     1.000004] iwi0 at pci1 dev 2 function 0: Intel PRO/Wireless LAN
 2200BG Mini-PCI Adapter (rev. 0x05)
 [     1.000004] iwi0: interrupting at irq 11
 [     1.000004] iwi0: 802.11 address 00:13:ce:6b:7d:01
 [     1.000004] iwi0: NIC type 0
 [     1.000004] cbb0 at pci1 dev 4 function 0: ENE Technology CB710
 CardBus Controller (rev. 0x00)
 [     1.000004] ENE Technology product 0530 (flash memory) at pci1 dev
 4 function 1 not configured
 [     1.000004] sdhc0 at pci1 dev 4 function 2: ENE Technology
 CB712/714/810 PCI SD Card Reader Controller (rev. 0x00)
 [     1.000004] sdhc0: interrupting at irq 5
 [     1.000004] sdhc0: SDHC 1.0, rev 0, caps <01e021a1/00000000>,
 SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
 [     1.000004] sdmmc0 at sdhc0 slot 0
 [     1.000004] cbb0: cacheline 0x8 lattimer 0x40
 [     1.000004] cbb0: bhlc 0x824008
 [     1.000004] cbb0: autoconfiguration error: secondary bus number
 uninitialized; try PCI_BUS_FIXUP
 [     1.000004] pci_intr_map: no mapping for pin A (line=ff)
 [     1.000004] cbb0: autoconfiguration error: couldn't map interrupt
 [     1.000004] cardslot0 at cbb0
 [     1.000004] pcmcia0 at cardslot0
 [     1.000004] auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
 [     1.000004] auich0: interrupting at irq 5
 [     1.000004] auich0: ac97: Avance Logic unknown (0x414c4752) codec;
 headphone, 20 bit DAC, 18 bit ADC, no 3D stereo
 [     1.000004] auich0: ac97: ext id 0xa07<AC97_23,AMAP,SPDIF,DRA,VRA>
 [     1.000004] Intel 82801FB/FR AC'97 Modem Controller (modem
 communications, revision 0x04) at pci0 dev 30 function 3 not
 configured
 [     1.000004] ichlpcib0 at pci0 dev 31 function 0: Intel 82801FBM
 ICH6M LPC Interface Bridge (rev. 0x04)
 [     1.000004] timecounter: Timecounter "ichlpcib0" frequency 3579545
 Hz quality 1000
 [     1.007527] ichlpcib0: 24-bit timer
 [     1.007527] tco0 at ichlpcib0: TCO (watchdog) timer configured.
 [     1.007527] tco0: Min/Max interval 1/367 seconds
 [     1.007527] piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE
 Controller (ICH6) (rev. 0x04)
 [     1.007527] piixide0: bus-master DMA support present
 [     1.007527] piixide0: primary channel configured to compatibility mode
 [     1.007527] piixide0: primary channel interrupting at irq 14
 [     1.007527] atabus0 at piixide0 channel 0
 [     1.007527] piixide0: secondary channel configured to compatibility mode
 [     1.007527] piixide0: secondary channel interrupting at irq 15
 [     1.007527] atabus1 at piixide0 channel 1
 [     1.007527] ichsmb0 at pci0 dev 31 function 3: Intel 82801FB/FR
 SMBus Controller (rev. 0x04)
 [     1.007527] ichsmb0: interrupting at irq 3
 [     1.007527] iic0 at ichsmb0: I2C bus
 [     1.007527] isa0 at ichlpcib0
 [     1.007527] pckbc0 at isa0 port 0x60-0x64
 [     1.007527] pckbd0 at pckbc0 (kbd slot)
 [     1.007527] pckbc0: using irq 1 for kbd slot
 [     1.007527] wskbd0 at pckbd0: console keyboard
 [     1.007527] pms0 at pckbc0 (aux slot)
 [     1.007527] pms0: ALPS PS/2 V2 pointing device
 [     1.007527] pckbc0: using irq 12 for aux slot
 [     1.007527] wsmouse0 at pms0 mux 0
 [     1.007527] attimer0 at isa0 port 0x40-0x43
 [     1.007527] pcppi0 at isa0 port 0x61
 [     1.007527] midi0 at pcppi0: PC speaker
 [     1.007527] sysbeep0 at pcppi0
 [     1.007527] attimer0: attached to pcppi0
 [     1.007527] est0 at cpu0: Enhanced SpeedStep
 [     1.007527] fwohci0: BUS reset
 [     1.007527] fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
 [     1.007527] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
 [     1.007527] ieee1394if0: bus manager 0
 [     1.268723] timecounter: Timecounter "clockinterrupt" frequency
 100 Hz quality 0
 [     1.598090] auich0: measured ac97 link rate at 48000 Hz
 [     1.598090] audio0 at auich0: playback, capture, full duplex, independent
 [     1.608115] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes
 (10ms) for playback
 [     1.608115] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes
 (10ms) for recording
 [     1.608115] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000),
 class 9/0, rev 1.00/1.00, addr 1
 [     1.608115] uhub0: 2 ports with 2 removable, self powered
 [     1.608115] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000),
 class 9/0, rev 1.00/1.00, addr 1
 [     1.608115] uhub1: 2 ports with 2 removable, self powered
 [     1.608115] uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000),
 class 9/0, rev 1.00/1.00, addr 1
 [     1.608115] uhub2: 2 ports with 2 removable, self powered
 [     1.608115] uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000),
 class 9/0, rev 1.00/1.00, addr 1
 [     1.608115] uhub3: 2 ports with 2 removable, self powered
 [     1.608115] uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000),
 class 9/0, rev 2.00/1.00, addr 1
 [     1.608115] uhub4: 8 ports with 8 removable, self powered
 [     1.618095] IPsec: Initialized Security Association Processing.
 [     1.628091] atapibus0 at atabus0: 2 targets
 [     1.708092] cd0 at atapibus0 drive 1: <TSSTcorpCD/DVDW TS-L632B,
 95WK401090, TI33> cdrom removable
 [     1.718092] cd0: 32-bit data port
 [     1.718092] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
 mode 2 (Ultra/33)
 [     1.718092] wd0 at atabus0 drive 0
 [     1.718092] wd0: <IC25N080ATMR04-0>
 [     1.718092] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 [     1.718092] wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512
 bytes/sect x 156301488 sectors
 [     1.798094] wd0: 32-bit data port
 [     1.798094] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
 mode 5 (Ultra/100)
 [     1.798094] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5
 (Ultra/100) (using DMA)
 [     1.798094] cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2
 (Ultra/33) (using DMA)
 [     2.128098] swwdog0: software watchdog initialized
 [     2.188099] WARNING: 2 errors while detecting hardware; check system log.
 [     2.188099] boot device: wd0
 [     2.188099] root on wd0a dumps on wd0b
 [     2.218100] root file system type: ffs
 [     2.228100] kern.module.path=/stand/i386/10.0/modules
 [     2.228100] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [     2.228100] [drm] Driver supports precise vblank timestamp query.
 [     2.228100] i915drmkms0: interrupting at irq 11 (i915drmkms0)
 [     2.248101] [drm] Initialized overlay support.
 [     2.248101] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
 [     2.398103] intelfb0 at i915drmkms0
 [     2.398103] [drm] DRM_I915_DEBUG enabled
 [     2.398103] [drm] DRM_I915_DEBUG_GEM enabled
 [     2.398103] intelfb0: framebuffer at 0xa0009000, size 1280x800,
 depth 32, stride 5120
 [     3.058113] wsdisplay0 at intelfb0 kbdmux 1: console (default,
 vt100 emulation), using wskbd0
 [     3.069273] wsmux1: connecting to wsdisplay0
 [     5.668154] firmware version = 196609
 [     5.668154] Firmware cached: boot 0xc454a010, ucode 0xc454b950,
 main 0xc454f8ce
 [     5.668154] Firmware cached: boot 6464, ucode 16254, main 168420
 [     5.668154] iwi_newstate: INIT -> INIT flags 0x1
 [     5.758154] Setting MAC address to 00:13:ce:6b:7d:01
 [     5.758154] sending command idx=0 type=11 len=6 async=0
 [     5.758154] Configuring adapter
 [     5.758154] sending command idx=1 type=6 len=20 async=0
 [     5.758154] Setting power mode to 0
 [     5.758154] sending command idx=2 type=17 len=4 async=0
 [     5.758154] Setting RTS threshold to 2346
 [     5.758154] sending command idx=3 type=15 len=4 async=0
 [     5.758154] Setting fragmentation threshold to 2346
 [     5.758154] sending command idx=4 type=16 len=4 async=0
 [     5.758154] Setting .11g channels tx power
 [     5.758154] sending command idx=5 type=35 len=76 async=0
 [     5.758154] Setting .11b channels tx power
 [     5.758154] sending command idx=6 type=35 len=76 async=0
 [     5.758154] Setting .11bg supported rates (12)
 [     5.758154] sending command idx=7 type=22 len=16 async=0
 [     5.758154] Setting .11a supported rates (0)
 [     5.758154] sending command idx=8 type=22 len=16 async=0
 [     5.758154] Setting initialization vector to 62515217
 [     5.758154] sending command idx=9 type=34 len=4 async=0
 [     5.758154] Enabling adapter
 [     5.758154] sending command idx=10 type=2 len=0 async=0
 [     5.758154] iwi_newstate: INIT -> SCAN flags 0x3
 [     5.758154] Start scanning
 [     5.758154] sending command idx=11 type=26 len=96 async=1
 [     5.758154] iwi_newstate: SCAN -> SCAN flags 0xb
 [     5.768156] firmware version = 196609
 [     5.768156] Firmware cached: boot 0xc454a010, ucode 0xc454b950,
 main 0xc454f8ce
 [     5.768156] Firmware cached: boot 6464, ucode 16254, main 168420
 [     5.908156] Scan of channel 2412 complete (1)
 [     6.008157] Scan of channel 2417 complete (2)
 [     6.118159] Scan of channel 2422 complete (3)
 [     6.218161] Scan of channel 2427 complete (4)
 [     6.328163] Scan of channel 2432 complete (5)
 [     6.438164] Scan of channel 2437 complete (6)
 [     6.548165] Scan of channel 2442 complete (7)
 [     6.648167] Scan of channel 2447 complete (8)
 [     6.758169] Scan of channel 2452 complete (9)
 [     6.868171] Scan of channel 2457 complete (10)
 [     6.998173] Scan of channel 2462 complete (11)
 [     7.128174] Scan of channel 2467 complete (12)
 [     7.248176] Scan of channel 2472 complete (13)
 [     7.378178] Scan of channel 2484 complete (14)
 [     7.378178] Scan completed (14, 1)
 [     7.378178] iwi_newstate: SCAN -> SCAN flags 0x3
 [     7.378178] Start scanning
 [     7.378178] sending command idx=12 type=26 len=96 async=1
 [     7.488180] Scan of channel 2412 complete (1)
 [     7.598182] Scan of channel 2417 complete (2)
 [     7.708183] Scan of channel 2422 complete (3)
 [     7.828185] Scan of channel 2427 complete (4)
 [     7.938187] Scan of channel 2432 complete (5)
 [     8.038189] Scan of channel 2437 complete (6)
 [     8.148190] Scan of channel 2442 complete (7)
 [     8.258192] Scan of channel 2447 complete (8)
 [     8.358193] Scan of channel 2452 complete (9)
 [     8.468195] Scan of channel 2457 complete (10)
 [     8.578197] Scan of channel 2462 complete (11)
 [     8.708198] Scan of channel 2467 complete (12)
 [     8.838201] Scan of channel 2472 complete (13)
 [     8.958203] Scan of channel 2484 complete (14)
 [     8.958203] Scan completed (14, 1)
 [     8.958203] iwi_newstate: SCAN -> SCAN flags 0x3
 [     8.958203] Start scanning
 [     8.958203] sending command idx=13 type=26 len=96 async=1
 [     9.078205] Scan of channel 2412 complete (1)
 [     9.198207] Scan of channel 2417 complete (2)
 [     9.298208] Scan of channel 2422 complete (3)
 [     9.408209] Scan of channel 2427 complete (4)
 [     9.518211] Scan of channel 2432 complete (5)
 [     9.628213] Scan of channel 2437 complete (6)
 [     9.748215] Scan of channel 2442 complete (7)
 [     9.848216] Scan of channel 2447 complete (8)
 [     9.958218] Scan of channel 2452 complete (9)
 [    10.078220] Scan of channel 2457 complete (10)
 [    10.208222] Scan of channel 2462 complete (11)
 [    10.338224] Scan of channel 2467 complete (12)
 [    10.458226] Scan of channel 2472 complete (13)
 [    10.588228] Scan of channel 2484 complete (14)
 [    10.588228] Scan completed (14, 1)
 [    10.588228] iwi_newstate: SCAN -> SCAN flags 0x3
 [    10.588228] Start scanning
 [    10.588228] sending command idx=14 type=26 len=96 async=1
 [    10.718230] Scan of channel 2412 complete (1)
 [    10.828233] Scan of channel 2417 complete (2)
 [    10.938233] Scan of channel 2422 complete (3)
 [    11.038235] Scan of channel 2427 complete (4)
 [    11.148237] Scan of channel 2432 complete (5)
 [    11.258238] Scan of channel 2437 complete (6)
 [    11.358240] Scan of channel 2442 complete (7)
 [    11.468242] Scan of channel 2447 complete (8)
 [    11.578243] Scan of channel 2452 complete (9)
 [    11.688245] Scan of channel 2457 complete (10)
 [    11.818247] Scan of channel 2462 complete (11)
 [    11.938250] Scan of channel 2467 complete (12)
 [    12.048250] firmware version = 196609
 [    12.058339] Firmware cached: boot 0xc46b9010, ucode 0xc46ba950,
 main 0xc46be8ce
 [    12.058339] Firmware cached: boot 6464, ucode 16254, main 168420
 [    12.058339] iwi_newstate: INIT -> SCAN flags 0xb
 [    12.058339] iwi_newstate: SCAN -> SCAN flags 0xb
 [    12.068253] Scan of channel 2472 complete (13)
 [    12.198255] Scan of channel 2484 complete (14)
 [    12.198255] Scan completed (14, 1)
 [    12.508257] wsdisplay0: screen 1 added (default, vt100 emulation)
 [    12.508257] wsdisplay0: screen 2 added (default, vt100 emulation)
 [    12.508257] wsdisplay0: screen 3 added (default, vt100 emulation)
 [    12.508257] wsdisplay0: screen 4 added (default, vt100 emulation)
 [    17.218330] firmware version = 196609
 [    17.218330] Firmware cached: boot 0xc4c28010, ucode 0xc4c29950,
 main 0xc4c2d8ce
 [    17.218330] Firmware cached: boot 6464, ucode 16254, main 168420
 [    17.218330] iwi_newstate: INIT -> SCAN flags 0x3
 [    17.218330] iwi_scan: Setting adapter desired ESSID to MiFibra-3422
 [    17.218330] sending command idx=15 type=8 len=12 async=1
 [    17.218330] Start scanning
 [    17.218330] sending command idx=0 type=26 len=96 async=1
 [    17.218330] iwi_newstate: SCAN -> SCAN flags 0xb
 [    17.338331] Scan of channel 2412 complete (1)
 [    17.458334] Scan of channel 2417 complete (2)
 [    17.568336] Scan of channel 2422 complete (3)
 [    17.678337] Scan of channel 2427 complete (4)
 [    17.788339] Scan of channel 2432 complete (5)
 [    17.898340] Scan of channel 2437 complete (6)
 [    18.018342] Scan of channel 2442 complete (7)
 [    18.128344] Scan of channel 2447 complete (8)
 [    18.238346] Scan of channel 2452 complete (9)
 [    18.348347] Scan of channel 2457 complete (10)
 [    18.478349] Scan of channel 2462 complete (11)
 [    18.628351] Scan of channel 2467 complete (12)
 [    18.768354] Scan of channel 2472 complete (13)
 [    18.918356] Scan of channel 2484 complete (14)
 [    18.918356] Scan completed (14, 1)
 [    18.918356] firmware version = 196609
 [    18.918356] Firmware cached: boot 0xc4cd7010, ucode 0xc4cd8950,
 main 0xc4cdc8ce
 [    18.918356] Firmware cached: boot 6464, ucode 16254, main 168420
 [    18.918356] iwi_newstate: SCAN -> AUTH flags 0x3
 [    18.918356] Configuring adapter
 [    18.918356] sending command idx=1 type=6 len=20 async=1
 [    18.918356] "MiFibra-3422"sending command idx=2 type=8 len=12 async=1
 [    18.918356] Setting negotiated rates (12)
 [    18.918356] sending command idx=3 type=22 len=16 async=1
 [    18.918356] Setting optional IE (len=22)
 [    18.918356] sending command idx=4 type=31 len=22 async=1
 [    18.918356] Setting sensitivity to 40
 [    18.918356] sending command idx=5 type=42 len=4 async=1
 [    18.918356] Join bssid 60:8d:26:32:34:24 dst 60:8d:26:32:34:24
 channel 11 policy 0x2 auth 0 capinfo 0x31 lintval 100 bintval 100
 [    18.918356] sending command idx=6 type=21 len=40 async=1
 [    19.448364] Authentication (1)
 [    19.448364] Association (0, 120)
 [    19.448364] iwi_newstate: AUTH -> SCAN flags 0x3
 [    19.448364] iwi_scan: Setting adapter desired ESSID to MiFibra-3422
 [    19.448364] sending command idx=7 type=8 len=12 async=1
 [    19.448364] Start scanning
 [    19.448364] sending command idx=8 type=26 len=96 async=1
 [    19.598366] Scan of channel 2412 complete (1)
 [    19.708368] Scan of channel 2417 complete (2)
 [    19.818370] Scan of channel 2422 complete (3)
 [    19.928372] Scan of channel 2427 complete (4)
 [    20.028373] Scan of channel 2432 complete (5)
 [    20.138377] Scan of channel 2437 complete (6)
 [    20.248376] Scan of channel 2442 complete (7)
 [    20.358378] Scan of channel 2447 complete (8)
 [    20.468380] Scan of channel 2452 complete (9)
 [    20.598382] Scan of channel 2457 complete (10)
 [    20.728384] Scan of channel 2462 complete (11)
 [    20.878386] Scan of channel 2467 complete (12)
 [    21.028388] Scan of channel 2472 complete (13)
 [    21.168391] Scan of channel 2484 complete (14)
 [    21.168391] Scan completed (14, 1)
 [    28.938639] iwi_newstate: SCAN -> INIT flags 0x3
 [    29.048644] firmware version = 196609
 [    29.048644] Firmware cached: boot 0xc5ac6010, ucode 0xc5ac7950,
 main 0xc5acb8ce
 [    29.048644] Firmware cached: boot 6464, ucode 16254, main 168420
 [    29.048644] iwi_newstate: INIT -> INIT flags 0x1
 [    29.138648] Setting MAC address to 00:13:ce:6b:7d:01
 [    29.138648] sending command idx=0 type=11 len=6 async=0
 [    29.138648] Configuring adapter
 [    29.138648] sending command idx=1 type=6 len=20 async=0
 [    29.138648] Setting power mode to 0
 [    29.138648] sending command idx=2 type=17 len=4 async=0
 [    29.138648] Setting RTS threshold to 2346
 [    29.138648] sending command idx=3 type=15 len=4 async=0
 [    29.138648] Setting fragmentation threshold to 2346
 [    29.138648] sending command idx=4 type=16 len=4 async=0
 [    29.138648] Setting .11g channels tx power
 [    29.138648] sending command idx=5 type=35 len=76 async=0
 [    29.138648] Setting .11b channels tx power
 [    29.138648] sending command idx=6 type=35 len=76 async=0
 [    29.138648] Setting .11bg supported rates (12)
 [    29.138648] sending command idx=7 type=22 len=16 async=0
 [    29.138648] Setting .11a supported rates (0)
 [    29.138648] sending command idx=8 type=22 len=16 async=0
 [    29.138648] Setting desired ESSID to "MiFibra-3422"
 [    29.138648] sending command idx=9 type=8 len=12 async=0
 [    29.138648] Setting initialization vector to 88842461
 [    29.138648] sending command idx=10 type=34 len=4 async=0
 [    29.138648] Setting wep key index 0 len 0
 [    29.138648] sending command idx=11 type=18 len=20 async=0
 [    29.138648] Setting wep key index 1 len 0
 [    29.138648] sending command idx=12 type=18 len=20 async=0
 [    29.148649] Setting wep key index 2 len 0
 [    29.148649] sending command idx=13 type=18 len=20 async=0
 [    29.148649] Setting wep key index 3 len 0
 [    29.148649] sending command idx=14 type=18 len=20 async=0
 [    29.148649] Enabling adapter
 [    29.148649] sending command idx=15 type=2 len=0 async=0
 [    29.148649] iwi_newstate: INIT -> SCAN flags 0x3
 [    29.148649] Start scanning
 [    29.148649] sending command idx=0 type=26 len=96 async=1
 [    29.148649] iwi_newstate: SCAN -> SCAN flags 0xb
 [    29.308654] Scan of channel 2412 complete (1)
 [    29.428659] Scan of channel 2417 complete (2)
 [    29.538663] Scan of channel 2422 complete (3)
 [    29.648667] Scan of channel 2427 complete (4)
 [    29.748670] Scan of channel 2432 complete (5)
 [    29.858675] Scan of channel 2437 complete (6)
 [    29.958679] Scan of channel 2442 complete (7)
 [    30.068683] Scan of channel 2447 complete (8)
 [    30.178687] Scan of channel 2452 complete (9)
 [    30.288691] Scan of channel 2457 complete (10)
 [    30.418696] Scan of channel 2462 complete (11)
 [    30.538701] Scan of channel 2467 complete (12)
 [    30.668706] Scan of channel 2472 complete (13)
 [    30.798711] Scan of channel 2484 complete (14)
 [    30.798711] Scan completed (14, 1)
 [    35.818902] firmware version = 196609
 [    35.818902] Firmware cached: boot 0xc5b75010, ucode 0xc5b76950,
 main 0xc5b7a8ce
 [    35.818902] Firmware cached: boot 6464, ucode 16254, main 168420
 [    35.818902] iwi_newstate: INIT -> SCAN flags 0x3
 [    35.818902] Start scanning
 [    35.818902] sending command idx=1 type=26 len=96 async=1
 [    35.818902] iwi_newstate: SCAN -> SCAN flags 0xb
 [    35.928907] Scan of channel 2412 complete (1)
 [    36.048911] Scan of channel 2417 complete (2)
 [    36.158916] Scan of channel 2422 complete (3)
 [    36.258919] Scan of channel 2427 complete (4)
 [    36.368924] Scan of channel 2432 complete (5)
 [    36.478928] Scan of channel 2437 complete (6)
 [    36.598932] Scan of channel 2442 complete (7)
 [    36.718937] Scan of channel 2447 complete (8)
 [    36.828941] Scan of channel 2452 complete (9)
 [    36.938945] Scan of channel 2457 complete (10)
 [    37.048949] Scan of channel 2462 complete (11)
 [    37.168954] Scan of channel 2467 complete (12)
 [    37.288959] Scan of channel 2472 complete (13)
 [    37.418963] Scan of channel 2484 complete (14)
 [    37.418963] Scan completed (14, 1)
 [    37.418963] firmware version = 196609
 [    37.418963] Firmware cached: boot 0xc5b75010, ucode 0xc5b76950,
 main 0xc5b7a8ce
 [    37.418963] Firmware cached: boot 6464, ucode 16254, main 168420
 [    37.418963] iwi_newstate: SCAN -> AUTH flags 0x3
 [    37.418963] Configuring adapter
 [    37.418963] sending command idx=2 type=6 len=20 async=1
 [    37.418963] "MiFibra-3422"sending command idx=3 type=8 len=12 async=1
 [    37.418963] Setting negotiated rates (12)
 [    37.418963] sending command idx=4 type=22 len=16 async=1
 [    37.418963] Setting optional IE (len=22)
 [    37.418963] sending command idx=5 type=31 len=22 async=1
 [    37.418963] Setting sensitivity to 48
 [    37.418963] sending command idx=6 type=42 len=4 async=1
 [    37.418963] Join bssid 60:8d:26:32:34:24 dst 60:8d:26:32:34:24
 channel 11 policy 0x2 auth 0 capinfo 0x31 lintval 100 bintval 100
 [    37.418963] sending command idx=7 type=21 len=40 async=1
 [    37.428965] Authentication (9)
 [    37.428965] iwi_newstate: AUTH -> ASSOC flags 0x3
 [    37.438964] Association (12, 24612)
 [    37.438964] iwi_newstate: ASSOC -> RUN flags 0x3
 [   189.144760] iwi0: unknown notification type 40 flags 0xa0 len 40
 [   194.364959] iwi0: unknown notification type 40 flags 0xa0 len 40
 [   279.268203] iwi0: unknown notification type 40 flags 0xa0 len 40
 [   284.488402] iwi0: unknown notification type 40 flags 0xa0 len 40
 [   734.980246] iwi0: unknown notification type 40 flags 0xa0 len 40
 [   740.200446] iwi0: unknown notification type 40 flags 0xa0 len 40
 [  2031.549774] iwi0: autoconfiguration error: fatal error
 [  2031.549774] iwi_newstate: RUN -> INIT flags 0x1
 [  4154.260862] iwi_newstate: INIT -> INIT flags 0x1
 [  4154.350865] Setting MAC address to 00:13:ce:6b:7d:01
 [  4154.350865] sending command idx=0 type=11 len=6 async=0
 [  4154.350865] Configuring adapter
 [  4154.350865] sending command idx=1 type=6 len=20 async=0
 [  4154.350865] Setting power mode to 0
 [  4154.350865] sending command idx=2 type=17 len=4 async=0
 [  4154.350865] Setting RTS threshold to 2346
 [  4154.350865] sending command idx=3 type=15 len=4 async=0
 [  4154.350865] Setting fragmentation threshold to 2346
 [  4154.350865] sending command idx=4 type=16 len=4 async=0
 [  4154.350865] Setting .11g channels tx power
 [  4154.350865] sending command idx=5 type=35 len=76 async=0
 [  4154.350865] Setting .11b channels tx power
 [  4154.350865] sending command idx=6 type=35 len=76 async=0
 [  4154.350865] Setting .11bg supported rates (12)
 [  4154.350865] sending command idx=7 type=22 len=16 async=0
 [  4154.350865] Setting .11a supported rates (0)
 [  4154.350865] sending command idx=8 type=22 len=16 async=0
 [  4154.350865] Setting initialization vector to 3834912395
 [  4154.350865] sending command idx=9 type=34 len=4 async=0
 [  4154.350865] Setting wep key index 0 len 0
 [  4154.350865] sending command idx=10 type=18 len=20 async=0
 [  4154.350865] Setting wep key index 1 len 0
 [  4154.350865] sending command idx=11 type=18 len=20 async=0
 [  4154.350865] Setting wep key index 2 len 0
 [  4154.350865] sending command idx=12 type=18 len=20 async=0
 [  4154.360866] Setting wep key index 3 len 0
 [  4154.360866] sending command idx=13 type=18 len=20 async=0
 [  4154.360866] Enabling adapter
 [  4154.360866] sending command idx=14 type=2 len=0 async=0
 [  4154.360866] firmware version = 196609
 [  4154.360866] Firmware cached: boot 0xc5ca4010, ucode 0xc5ca5950,
 main 0xc5ca98ce
 [  4154.360866] Firmware cached: boot 6464, ucode 16254, main 168420
 [  4154.360866] iwi_newstate: INIT -> INIT flags 0x1
 [  4154.450870] Setting MAC address to 00:13:ce:6b:7d:01
 [  4154.460886] sending command idx=0 type=11 len=6 async=0
 [  4154.460886] Configuring adapter
 [  4154.460886] sending command idx=1 type=6 len=20 async=0
 [  4154.460886] Setting power mode to 0
 [  4154.460886] sending command idx=2 type=17 len=4 async=0
 [  4154.460886] Setting RTS threshold to 2346
 [  4154.460886] sending command idx=3 type=15 len=4 async=0
 [  4154.460886] Setting fragmentation threshold to 2346
 [  4154.460886] sending command idx=4 type=16 len=4 async=0
 [  4154.460886] Setting .11g channels tx power
 [  4154.460886] sending command idx=5 type=35 len=76 async=0
 [  4154.460886] Setting .11b channels tx power
 [  4154.460886] sending command idx=6 type=35 len=76 async=0
 [  4154.460886] Setting .11bg supported rates (12)
 [  4154.460886] sending command idx=7 type=22 len=16 async=0
 [  4154.460886] Setting .11a supported rates (0)
 [  4154.460886] sending command idx=8 type=22 len=16 async=0
 [  4154.460886] Setting initialization vector to 3983743530
 [  4154.460886] sending command idx=9 type=34 len=4 async=0
 [  4154.460886] Setting wep key index 0 len 0
 [  4154.460886] sending command idx=10 type=18 len=20 async=0
 [  4154.460886] Setting wep key index 1 len 0
 [  4154.460886] sending command idx=11 type=18 len=20 async=0
 [  4154.460886] Setting wep key index 2 len 0
 [  4154.460886] sending command idx=12 type=18 len=20 async=0
 [  4154.460886] Setting wep key index 3 len 0
 [  4154.460886] sending command idx=13 type=18 len=20 async=0
 [  4154.460886] Enabling adapter
 [  4154.460886] sending command idx=14 type=2 len=0 async=0
 [  4154.460886] iwi_newstate: INIT -> SCAN flags 0x3
 [  4154.460886] iwi_scan: Setting adapter desired ESSID to MiFibra-3422
 [  4154.460886] sending command idx=15 type=8 len=12 async=1
 [  4154.460886] Start scanning
 [  4154.460886] sending command idx=0 type=26 len=96 async=1
 [  4154.460886] iwi_newstate: SCAN -> SCAN flags 0xb
 [  4154.610875] Scan of channel 2412 complete (1)
 [  4154.710879] Scan of channel 2417 complete (2)
 [  4154.820883] Scan of channel 2422 complete (3)
 [  4154.930887] Scan of channel 2427 complete (4)
 [  4155.040891] Scan of channel 2432 complete (5)
 [  4155.170896] Scan of channel 2437 complete (6)
 [  4155.280900] Scan of channel 2442 complete (7)
 [  4155.390905] Scan of channel 2447 complete (8)
 [  4155.500909] Scan of channel 2452 complete (9)
 [  4155.600913] Scan of channel 2457 complete (10)
 [  4155.750919] Scan of channel 2462 complete (11)
 [  4155.900924] Scan of channel 2467 complete (12)
 [  4156.050930] Scan of channel 2472 complete (13)
 [  4156.190935] Scan of channel 2484 complete (14)
 [  4156.190935] Scan completed (14, 1)
 [  4156.190935] firmware version = 196609
 [  4156.190935] Firmware cached: boot 0xc5ca4010, ucode 0xc5ca5950,
 main 0xc5ca98ce
 [  4156.190935] Firmware cached: boot 6464, ucode 16254, main 168420
 [  4156.190935] iwi_newstate: SCAN -> AUTH flags 0x3
 [  4156.190935] Configuring adapter
 [  4156.190935] sending command idx=1 type=6 len=20 async=1
 [  4156.190935] "MiFibra-3422"sending command idx=2 type=8 len=12 async=1
 [  4156.190935] Setting negotiated rates (12)
 [  4156.190935] sending command idx=3 type=22 len=16 async=1
 [  4156.190935] Setting optional IE (len=22)
 [  4156.190935] sending command idx=4 type=31 len=22 async=1
 [  4156.190935] Setting sensitivity to 51
 [  4156.190935] sending command idx=5 type=42 len=4 async=1
 [  4156.190935] Join bssid 60:8d:26:32:34:24 dst 60:8d:26:32:34:24
 channel 11 policy 0x2 auth 0 capinfo 0x31 lintval 100 bintval 100
 [  4156.190935] sending command idx=6 type=21 len=40 async=1
 [  4156.210936] Authentication (9)
 [  4156.210936] iwi_newstate: AUTH -> ASSOC flags 0x3
 [  4156.310940] Association (0, 26)
 [  4156.310940] iwi_newstate: ASSOC -> SCAN flags 0x3
 [  4156.310940] iwi_scan: Setting adapter desired ESSID to MiFibra-3422
 [  4156.310940] sending command idx=7 type=8 len=12 async=1
 [  4156.310940] Start scanning
 [  4156.310940] sending command idx=8 type=26 len=96 async=1
 [  4156.430945] Scan of channel 2412 complete (1)
 [  4156.550949] Scan of channel 2417 complete (2)
 [  4156.660953] Scan of channel 2422 complete (3)
 [  4156.770957] Scan of channel 2427 complete (4)
 [  4156.890962] Scan of channel 2432 complete (5)
 [  4157.010967] Scan of channel 2437 complete (6)
 [  4157.120971] Scan of channel 2442 complete (7)
 [  4157.230975] Scan of channel 2447 complete (8)
 [  4157.330979] Scan of channel 2452 complete (9)
 [  4157.450984] Scan of channel 2457 complete (10)
 [  4157.590990] Scan of channel 2462 complete (11)
 [  4157.740994] Scan of channel 2467 complete (12)
 [  4157.891000] Scan of channel 2472 complete (13)
 [  4158.041006] Scan of channel 2484 complete (14)
 [  4158.041006] Scan completed (14, 1)
 [  4166.211318] iwi_newstate: SCAN -> INIT flags 0x3
 [  4166.321322] firmware version = 196609
 [  4166.321322] Firmware cached: boot 0xc5ca4010, ucode 0xc5ca5950,
 main 0xc5ca98ce
 [  4166.321322] Firmware cached: boot 6464, ucode 16254, main 168420
 [  4166.321322] iwi_newstate: INIT -> INIT flags 0x1
 [  4166.411326] Setting MAC address to 00:13:ce:6b:7d:01
 [  4166.411326] sending command idx=0 type=11 len=6 async=0
 [  4166.411326] Configuring adapter
 [  4166.411326] sending command idx=1 type=6 len=20 async=0
 [  4166.411326] Setting power mode to 0
 [  4166.411326] sending command idx=2 type=17 len=4 async=0
 [  4166.411326] Setting RTS threshold to 2346
 [  4166.411326] sending command idx=3 type=15 len=4 async=0
 [  4166.411326] Setting fragmentation threshold to 2346
 [  4166.411326] sending command idx=4 type=16 len=4 async=0
 [  4166.411326] Setting .11g channels tx power
 [  4166.411326] sending command idx=5 type=35 len=76 async=0
 [  4166.411326] Setting .11b channels tx power
 [  4166.411326] sending command idx=6 type=35 len=76 async=0
 [  4166.411326] Setting .11bg supported rates (12)
 [  4166.411326] sending command idx=7 type=22 len=16 async=0
 [  4166.411326] Setting .11a supported rates (0)
 [  4166.411326] sending command idx=8 type=22 len=16 async=0
 [  4166.411326] Setting desired ESSID to "MiFibra-3422"
 [  4166.411326] sending command idx=9 type=8 len=12 async=0
 [  4166.411326] Setting initialization vector to 3644409434
 [  4166.411326] sending command idx=10 type=34 len=4 async=0
 [  4166.411326] Setting wep key index 0 len 0
 [  4166.411326] sending command idx=11 type=18 len=20 async=0
 [  4166.411326] Setting wep key index 1 len 0
 [  4166.411326] sending command idx=12 type=18 len=20 async=0
 [  4166.411326] Setting wep key index 2 len 0
 [  4166.421366] sending command idx=13 type=18 len=20 async=0
 [  4166.421366] Setting wep key index 3 len 0
 [  4166.421366] sending command idx=14 type=18 len=20 async=0
 [  4166.421366] Enabling adapter
 [  4166.421366] sending command idx=15 type=2 len=0 async=0
 [  4166.421366] iwi_newstate: INIT -> SCAN flags 0x3
 [  4166.421366] Start scanning
 [  4166.421366] sending command idx=0 type=26 len=96 async=1
 [  4166.421366] iwi_newstate: SCAN -> SCAN flags 0xb
 [  4166.561332] Scan of channel 2412 complete (1)
 [  4166.671335] Scan of channel 2417 complete (2)
 [  4166.781339] Scan of channel 2422 complete (3)
 [  4166.881344] Scan of channel 2427 complete (4)
 [  4166.991348] Scan of channel 2432 complete (5)
 [  4167.101352] Scan of channel 2437 complete (6)
 [  4167.201356] Scan of channel 2442 complete (7)
 [  4167.311360] Scan of channel 2447 complete (8)
 [  4167.421364] Scan of channel 2452 complete (9)
 [  4167.531368] Scan of channel 2457 complete (10)
 [  4167.661373] Scan of channel 2462 complete (11)
 [  4167.791379] Scan of channel 2467 complete (12)
 [  4167.911383] Scan of channel 2472 complete (13)
 [  4168.041388] Scan of channel 2484 complete (14)
 [  4168.041388] Scan completed (14, 1)
 [  4168.041388] firmware version = 196609
 [  4168.041388] Firmware cached: boot 0xc5ca4010, ucode 0xc5ca5950,
 main 0xc5ca98ce
 [  4168.041388] Firmware cached: boot 6464, ucode 16254, main 168420
 [  4168.041388] iwi_newstate: SCAN -> AUTH flags 0x3
 [  4168.041388] Configuring adapter
 [  4168.041388] sending command idx=1 type=6 len=20 async=1
 [  4168.041388] "MiFibra-3422"sending command idx=2 type=8 len=12 async=1
 [  4168.041388] Setting negotiated rates (12)
 [  4168.041388] sending command idx=3 type=22 len=16 async=1
 [  4168.041388] Setting optional IE (len=22)
 [  4168.041388] sending command idx=4 type=31 len=22 async=1
 [  4168.041388] Setting sensitivity to 44
 [  4168.041388] sending command idx=5 type=42 len=4 async=1
 [  4168.041388] Join bssid 60:8d:26:32:34:24 dst 60:8d:26:32:34:24
 channel 11 policy 0x2 auth 0 capinfo 0x31 lintval 100 bintval 100
 [  4168.041388] sending command idx=6 type=21 len=40 async=1
 [  4168.051390] Authentication (9)
 [  4168.051390] iwi_newstate: AUTH -> ASSOC flags 0x3
 [  4168.051390] Association (12, 24612)
 [  4168.051390] iwi_newstate: ASSOC -> RUN flags 0x3
 [  4230.223766] iwi_newstate: RUN -> INIT flags 0x1
 [  4230.413772] iwi_newstate: INIT -> INIT flags 0x1
 [  4230.513774] Setting MAC address to 00:13:ce:6b:7d:01
 [  4230.513774] sending command idx=0 type=11 len=6 async=0
 [  4230.513774] Configuring adapter
 [  4230.513774] sending command idx=1 type=6 len=20 async=0
 [  4230.513774] Setting power mode to 0
 [  4230.513774] sending command idx=2 type=17 len=4 async=0
 [  4230.513774] Setting RTS threshold to 2346
 [  4230.513774] sending command idx=3 type=15 len=4 async=0
 [  4230.513774] Setting fragmentation threshold to 2346
 [  4230.513774] sending command idx=4 type=16 len=4 async=0
 [  4230.513774] Setting .11g channels tx power
 [  4230.513774] sending command idx=5 type=35 len=76 async=0
 [  4230.513774] Setting .11b channels tx power
 [  4230.513774] sending command idx=6 type=35 len=76 async=0
 [  4230.513774] Setting .11bg supported rates (12)
 [  4230.513774] sending command idx=7 type=22 len=16 async=0
 [  4230.513774] Setting .11a supported rates (0)
 [  4230.513774] sending command idx=8 type=22 len=16 async=0
 [  4230.513774] Setting initialization vector to 1690993128
 [  4230.513774] sending command idx=9 type=34 len=4 async=0
 [  4230.513774] Setting wep key index 0 len 0
 [  4230.513774] sending command idx=10 type=18 len=20 async=0
 [  4230.513774] Setting wep key index 1 len 16
 [  4230.513774] sending command idx=11 type=18 len=20 async=0
 [  4230.513774] Setting wep key index 2 len 0
 [  4230.513774] sending command idx=12 type=18 len=20 async=0
 [  4230.513774] Setting wep key index 3 len 0
 [  4230.513774] sending command idx=13 type=18 len=20 async=0
 [  4230.513774] Enabling adapter
 [  4230.513774] sending command idx=14 type=2 len=0 async=0
 [  4230.513774] firmware version = 196609
 [  4230.513774] Firmware cached: boot 0xc5ca4010, ucode 0xc5ca5950,
 main 0xc5ca98ce
 [  4230.513774] Firmware cached: boot 6464, ucode 16254, main 168420
 [  4230.513774] iwi_newstate: INIT -> INIT flags 0x1
 [  4230.613778] Setting MAC address to 00:13:ce:6b:7d:01
 [  4230.613778] sending command idx=0 type=11 len=6 async=0
 [  4230.613778] Configuring adapter
 [  4230.613778] sending command idx=1 type=6 len=20 async=0
 [  4230.613778] Setting power mode to 0
 [  4230.613778] sending command idx=2 type=17 len=4 async=0
 [  4230.613778] Setting RTS threshold to 2346
 [  4230.613778] sending command idx=3 type=15 len=4 async=0
 [  4230.613778] Setting fragmentation threshold to 2346
 [  4230.613778] sending command idx=4 type=16 len=4 async=0
 [  4230.613778] Setting .11g channels tx power
 [  4230.613778] sending command idx=5 type=35 len=76 async=0
 [  4230.613778] Setting .11b channels tx power
 [  4230.613778] sending command idx=6 type=35 len=76 async=0
 [  4230.613778] Setting .11bg supported rates (12)
 [  4230.613778] sending command idx=7 type=22 len=16 async=0
 [  4230.613778] Setting .11a supported rates (0)
 [  4230.613778] sending command idx=8 type=22 len=16 async=0
 [  4230.613778] Setting initialization vector to 3388982611
 [  4230.613778] sending command idx=9 type=34 len=4 async=0
 [  4230.613778] Setting wep key index 0 len 0
 [  4230.613778] sending command idx=10 type=18 len=20 async=0
 [  4230.613778] Setting wep key index 1 len 16
 [  4230.613778] sending command idx=11 type=18 len=20 async=0
 [  4230.613778] Setting wep key index 2 len 0
 [  4230.613778] sending command idx=12 type=18 len=20 async=0
 [  4230.613778] Setting wep key index 3 len 0
 [  4230.613778] sending command idx=13 type=18 len=20 async=0
 [  4230.613778] Enabling adapter
 [  4230.613778] sending command idx=14 type=2 len=0 async=0
 [  4230.613778] iwi_newstate: INIT -> SCAN flags 0x3
 [  4230.613778] Start scanning
 [  4230.613778] sending command idx=15 type=26 len=96 async=1
 [  4230.613778] iwi_newstate: SCAN -> SCAN flags 0xb
 [  4230.613778] firmware version = 196609
 [  4230.613778] Firmware cached: boot 0xc5ca4010, ucode 0xc5ca5950,
 main 0xc5ca98ce
 [  4230.613778] Firmware cached: boot 6464, ucode 16254, main 168420
 [  4230.753784] Scan of channel 2412 complete (1)
 [  4230.863788] Scan of channel 2417 complete (2)
 [  4230.973792] Scan of channel 2422 complete (3)
 [  4231.073796] Scan of channel 2427 complete (4)
 [  4231.183800] Scan of channel 2432 complete (5)
 [  4231.293804] Scan of channel 2437 complete (6)
 [  4231.393808] Scan of channel 2442 complete (7)
 [  4231.503812] Scan of channel 2447 complete (8)
 [  4231.613817] Scan of channel 2452 complete (9)
 [  4231.713821] Scan of channel 2457 complete (10)
 [  4231.843825] Scan of channel 2462 complete (11)
 [  4231.973830] Scan of channel 2467 complete (12)
 [  4232.093835] Scan of channel 2472 complete (13)
 [  4232.223840] Scan of channel 2484 complete (14)
 [  4232.223840] Scan completed (14, 1)
 [  4232.223840] firmware version = 196609
 [  4232.223840] Firmware cached: boot 0xc5ca4010, ucode 0xc5ca5950,
 main 0xc5ca98ce
 [  4232.223840] Firmware cached: boot 6464, ucode 16254, main 168420
 [  4232.223840] iwi_newstate: SCAN -> AUTH flags 0x3
 [  4232.223840] Configuring adapter
 [  4232.223840] sending command idx=0 type=6 len=20 async=1
 [  4232.223840] "MiFibra-3422"sending command idx=1 type=8 len=12 async=1
 [  4232.223840] Setting negotiated rates (12)
 [  4232.223840] sending command idx=2 type=22 len=16 async=1
 [  4232.223840] Setting optional IE (len=22)
 [  4232.223840] sending command idx=3 type=31 len=22 async=1
 [  4232.223840] Setting sensitivity to 52
 [  4232.223840] sending command idx=4 type=42 len=4 async=1
 [  4232.223840] Join bssid 60:8d:26:32:34:24 dst 60:8d:26:32:34:24
 channel 11 policy 0x2 auth 0 capinfo 0x31 lintval 100 bintval 100
 [  4232.223840] sending command idx=5 type=21 len=40 async=1
 [  4232.233841] Authentication (9)
 [  4232.233841] iwi_newstate: AUTH -> ASSOC flags 0x3
 [  4232.243841] Association (12, 24612)
 [  4232.243841] iwi_newstate: ASSOC -> RUN flags 0x3
 
 Regards
 Ramiro.
 



Home | Main Index | Thread Index | Old Index