Subject: le0 dosen't work on SS10
To: None <current-users@NetBSD.ORG>
From: Kazufumi-MIT-Mitani <mit@mit-s.otaru-uc.ac.jp>
List: current-users
Date: 04/15/1998 15:38:35
my ss10 box say (dmesg)

NetBSD 1.3E (MITU) #10: Wed Apr 15 15:21:25 JST 1998
    mit@mits10:/mnt/src/sys/arch/sparc/compile/MITU
real mem = 32784384
avail mem = 27873280
using 400 buffers containing 1638400 bytes of memory
bootpath: /iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@3,0
mainbus0 (root): SUNW,SPARCstation-10,SX
cpu0 at mainbus0: mid 8: TMS390Z50 v0 or TMS390Z55 @ 50 MHz, on-chip FPU
cpu0: physical 20K instruction (64 b/l), 16K data (32 b/l), 1024K external (32 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0x300000 delay constant 23
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
fdc0 at obio0 slot 0 offset 0x700000 level 11 softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
auxreg0 at obio0 slot 0 offset 0x800000
power0 at obio0 slot 0 offset 0xa01000 level 2
cgfourteen0 at obio0 slot 1 offset 0x0 level 8: cgthree emulated at 1152x900x8bpp (console)
cgfourteen0: attached to /dev/fb
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x1/0x1, page-size 4096, range 64MB
[[iommu: bootpath component: sbus]]
sbus0 at iommu0: clock = 20 MHz
dma0 at sbus0 slot 15 offset 0x400000: rev 2
esp0 at dma0 slot 15 offset 0x800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
probe(esp0:1:0): max sync rate 10.00Mb/s
sd1 at scsibus0 targ 1 lun 0: <IBM, DCAS-34330, S65A> SCSI2 0/direct fixed
sd1: 4134MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
probe(esp0:3:0): max sync rate 10.00Mb/s
sd0 at scsibus0 targ 3 lun 0: <SEAGATE, ST11200N SUN1.05, 9500> SCSI2 0/direct fixed
sd0: 1005MB, 1872 cyl, 15 head, 73 sec, 512 bytes/sect x 2059140 sectors
cd0 at scsibus0 targ 6 lun 0: <SONY, CD-ROM CDU-8012, 3.1e> SCSI2 5/cdrom removable
ledma0 at sbus0 slot 15 offset 0x400010: rev 2
le0 at ledma0 slot 15 offset 0xc00000 level 6: address 08:00:20:1d:ed:e8
le0: 8 receive buffers, 2 transmit buffers
SUNW,bpp at sbus0 slot 15 offset 0x4800000 level 2 (ipl 3) not configured
SUNW,DBRIe at sbus0 slot 14 offset 0x10000 level 9 not configured
root on sd0a dumps on sd0b
root file system type: ffs
uvm_swap: allocated 200 swap buffer headers
le0: card failed to initialize
ledma0: error: csr=a0460012<ERR,IEN>
stray interrupt ipl 0x6 pc=0xf008d730 npc=0xf008d734 psr=404000c6<S,PS>
le0: card failed to initialize
ledma0: error: csr=a0460012<ERR,IEN>
stray interrupt ipl 0x6 pc=0xf00103cc npc=0xf00103d0 psr=400001c4<S,PS>
le0: card failed to initialize
ledma0: error: csr=a0460012<ERR,IEN>
stray interrupt ipl 0x6 pc=0xf00103cc npc=0xf00103d0 psr=400001c6<S,PS>


and can't use le0.
source is suped Apr 15 morning(JST).
netbsd-1.3.1 kernel also didn't up on my box.
(I'm using Feb. 27 current kernel now)

---
Kazufumi MITANI
Department of Information and Management Science
Faculty of Commerce, Otaru University of Commerce
3-5-21, Midori, Otaru-shi, Hokkaido, 047-8501 Japan
Internet: mit@mit-s.otaru-uc.ac.jp
PHONE/FAX: +81-134-27-5392